EUVIMEDEUVIMED entdecken
Crossref

Equally Efficient Perovskite Solar Cells and Modules Fabricated via N‐Ethyl‐2‐Pyrrolidone Optimized Vacuum‐Flash

Yibo Xu, Chenguang Zhou, Xinzhu Li, Kaihuai Du, Yue Li, Xu Dong, Ningyi Yuan iD, Lvzhou Li, Jianning Ding iD

Small Methods · 2024-12 · 8 (12)

DOI: 10.1002/smtd.202400428 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, online erschienen am 14.05.2024. Verfasst von Yibo Xu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center for Photovoltaic Science and Engineering, Jiangsu Province Culti…. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: Science and technology innovation of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficiency reduction in perovskite solar cells (PSCs) during the magnification procedure significantly hampers commercialization. Vacuum‐flash (VF) has emerged as a promising method to fabricate PSCs with consistent efficiency across scales. However, the slower solvent removal rate of VF compared to the anti‐solvent method leads to perovskite films with buried defects. Thus, this work employs low‐toxic Lewis base ligand solvent N‐ethyl‐2‐pyrrolidone (NEP) to improve the nucleation process of perovskite films. NEP, with a mechanism similar to that of N‐methyl‐2‐pyrrolidone in FA‐based perovskite formation, enhances the solvent removal speed owing to its lower coordination ability. Based on this strategy, p – i –n PSCs with an optimized interface attain a power conversion efficiency (PCE) of 24.19% on an area of 0.08 cm 2 . The same nucleation process enables perovskite solar modules (PSMs) to achieve a certified PCE of 23.28% on an aperture area of 22.96 cm 2 , with a high geometric fill factor of 97%, ensuring nearly identical active area PCE (24%) in PSMs as in PSCs. This strategy highlights the potential of NEP as a ligand solvent choice for the commercialization of PSCs.

Schlagwörter

Stichwörter der Autor:innen

perovskite solar modulessolvent engineeringvacuum‐flashwithout efficiency loss

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Jiangsu Collaborative Innovation Center for Photovoltaic Science and Engineering, Jiangsu Province Cultivation base for State Key Laboratory of Photovoltaic Science and Techn…
  • Yangzhou Technological Innovation Institute for Carbon Neutralization, Yangzhou University, Yangzhou, Jiangsu, 225127, P. R. China.

ORCID-Profile: Ningyi Yuan, Jianning Ding

Förderung

  • Science and technology innovation of Jiangsu Province

Zitieren

APA

Xu, Y., Zhou, C., Li, X., Du, K., Li, Y., Dong, X., Yuan, N., Li, L., & Ding, J. (2024). Equally Efficient Perovskite Solar Cells and Modules Fabricated via N‐Ethyl‐2‐Pyrrolidone Optimized Vacuum‐Flash. Small Methods, 8(12). https://doi.org/10.1002/smtd.202400428

Vancouver

Xu Y, Zhou C, Li X, Du K, Li Y, Dong X, et al. Equally Efficient Perovskite Solar Cells and Modules Fabricated via N‐Ethyl‐2‐Pyrrolidone Optimized Vacuum‐Flash. Small Methods. 2024;8(12). doi:10.1002/smtd.202400428

BibTeX
@article{Xu2024,
  author = {Xu, Yibo and Zhou, Chenguang and Li, Xinzhu and Du, Kaihuai and Li, Yue and Dong, Xu and Yuan, Ningyi and Li, Lvzhou and Ding, Jianning},
  title = {Equally Efficient Perovskite Solar Cells and Modules Fabricated via N‐Ethyl‐2‐Pyrrolidone Optimized Vacuum‐Flash},
  journal = {Small Methods},
  year = {2024},
  volume = {8},
  number = {12},
  doi = {10.1002/smtd.202400428}
}
Kostenlos starten →