Pillar‐Structured Ti 3 C 2 T x MXene with Engineered Interlayer Spacing for High‐Performance Magnesium Batteries
Small Methods · 2024-12 · 8 (12)
DOI: 10.1002/smtd.202400004 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 07.02.2024. Verfasst von Bahareh Raisi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Materials Engineering, Concordia University, Montreal, Quebec, H3G 1M8, Canada. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Natural Science and Engineering Research Council of Canada.
Abstract (Originalsprache)
Two‐dimentional (2D) Ti 3 C 2 T x MXene has attracted significant attention in non‐lithium‐ion batteries due to its excellent electrical conductivity, high volumetric capacity, and ability to accommodate intercalants. Rechargeable magnesium batteries with Mg metal anodes are noted for their high theoretical energy density, potential safety, earth abundance, dendrite‐free Mg 2+ plating/stripping mechanism on the anode side, and low cost. Nevertheless, owing to the large polarity of divalent Mg 2+ ions, the insertion of Mg 2+ into the MXene layers suffers from sluggish kinetics, limiting the performance for storage of Mg 2+ ions. Herein, a simple self‐assembly strategy is demonstrated to achieve high magnesium ion storage capability with pillar‐structured Ti 3 C 2 T x MXene by intercalating a hyperbranched polyethylene ionomer containing quaternary ammonium ions. The ionomer intercalation/modification leads to the expansion of interlayer spacing of the MXene and, meanwhile, improves its affinity to low‐polarity THF‐based electrolyte. The delaminated ionomer‐modified MXene shows significantly improved electrochemical performance as a cathode material for Mg batteries. It shows a promising cycling stability with a capacity retention of 86% after 400 cycles at 200 mA g −1 , as well as outstanding high‐rate performance with a capacity of 110 mAh g −1 retained at 1,000 mA g −1 relative to 213 mAh g −1 at 20 mA g −1 .
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Materials Engineering, Concordia University, Montreal, Quebec, H3G 1M8, Canada.
ORCID-Profile: Bahareh Raisi, Zhibin Ye
Förderung
- Natural Science and Engineering Research Council of Canada
Zitieren
APA
Raisi, B., Liu, X., Rahmatinejad, J., & Ye, Z. (2024). Pillar‐Structured Ti 3 C 2 T x MXene with Engineered Interlayer Spacing for High‐Performance Magnesium Batteries. Small Methods, 8(12). https://doi.org/10.1002/smtd.202400004
Vancouver
Raisi B, Liu X, Rahmatinejad J, Ye Z. Pillar‐Structured Ti 3 C 2 T x MXene with Engineered Interlayer Spacing for High‐Performance Magnesium Batteries. Small Methods. 2024;8(12). doi:10.1002/smtd.202400004
BibTeX
@article{Raisi2024,
author = {Raisi, Bahareh and Liu, Xudong and Rahmatinejad, Jalal and Ye, Zhibin},
title = {Pillar‐Structured Ti 3 C 2 T x MXene with Engineered Interlayer Spacing for High‐Performance Magnesium Batteries},
journal = {Small Methods},
year = {2024},
volume = {8},
number = {12},
doi = {10.1002/smtd.202400004}
}
EUVIMED