EUVIMEDEUVIMED entdecken
Crossref

Hierarchically Interconnected 3D Catalyst Structure of Porous Multi‐Metal Oxide Nanofibers for High‐Performance Li–O 2 Batteries

Keon Beom Lee, Seunghwan Jo, Liting Zhang, Min-Cheol Kim, Jung Inn Sohn iD

Small Methods · 2024-08 · 8 (8)

DOI: 10.1002/smtd.202301728 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Methods, 2024-03. Verfasst von Keon Beom Lee und 4 weiteren Autor:innen. Beteiligte Einrichtung: Division of Physics and Semiconductor Science, Dongguk University-Seoul, Seoul, 04620, Republic of Korea. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Research Foundation of Korea, Commercialization Promotion Agency for R&D Outcomes, Ministry of Science and ICT, South Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Non‐aqueous lithium‐oxygen batteries (LOBs) have emerged as a promising candidate due to their high theoretical energy density and eco‐friendly cathode reaction materials. However, LOBs still suffer from high overpotential and poor cycling stability resulting from difficulties in the decomposition of discharge reaction Li 2 O 2 products. Here, a 3D open network catalyst structure is proposed based on highly‐thin and porous multi‐metal oxide nanofibers (MMONFs) developed by a facile electrospinning approach coupled with a heat treatment process. The developed hierarchically interconnected 3D porous MMONFs catalyst structure with high specific surface area and porosity shows the enhanced electrochemical reaction kinetics associated with Li 2 O 2 formation and decomposition on the cathode surface during the charge and discharge processes. The uniquely assembled cathode materials with MMONFs exhibit excellent electrochemical performance with energy efficiency of 82% at a current density of 50 mA g −1 and a long‐term cycling stability over 100 cycles at 200 mA g −1 with a cut‐off capacity of 500 mAh g −1 . Moreover, the optimized cathode materials exhibit a remarkable energy density of 1013 Wh kg −1 at the 100th discharge and charge cycle, which is nearly four times higher than that of C/NMC721, which has the highest energy density among the cathode materials currently used in electric vehicles.

Schlagwörter

Stichwörter der Autor:innen

3D catalyst structureLi–O2 batterycycle stabilitymulti‐metal oxideporous nanofibers

Autor:innen und Institutionen

  • Division of Physics and Semiconductor Science, Dongguk University-Seoul, Seoul, 04620, Republic of Korea.

ORCID-Profile: Jung Inn Sohn

Förderung

  • National Research Foundation of Korea, Commercialization Promotion Agency for R&D Outcomes
  • Ministry of Science and ICT, South Korea

Zitieren

APA

Lee, K. B., Jo, S., Zhang, L., Kim, M. C., & Sohn, J. I. (2024). Hierarchically Interconnected 3D Catalyst Structure of Porous Multi‐Metal Oxide Nanofibers for High‐Performance Li–O 2 Batteries. Small Methods, 8(8). https://doi.org/10.1002/smtd.202301728

Vancouver

Lee KB, Jo S, Zhang L, Kim MC, Sohn JI. Hierarchically Interconnected 3D Catalyst Structure of Porous Multi‐Metal Oxide Nanofibers for High‐Performance Li–O 2 Batteries. Small Methods. 2024;8(8). doi:10.1002/smtd.202301728

BibTeX
@article{Lee2024,
  author = {Lee, Keon Beom and Jo, Seunghwan and Zhang, Liting and Kim, Min-Cheol and Sohn, Jung Inn},
  title = {Hierarchically Interconnected 3D Catalyst Structure of Porous Multi‐Metal Oxide Nanofibers for High‐Performance Li–O 2 Batteries},
  journal = {Small Methods},
  year = {2024},
  volume = {8},
  number = {8},
  doi = {10.1002/smtd.202301728}
}
Kostenlos starten →