Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiO x /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells
Small Methods · 2024-02 · 8 (2)
DOI: 10.1002/smtd.202300241 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 28.05.2023. Verfasst von Zhengyan Jiang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, 518055, China. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: National Key Research and Development Project from the Ministry of Science and Technology of China, National Natural Science Foundation of China, Basic and Applied Basic Research Foundation of Guangdong Province.
Abstract (Originalsprache)
Nickel oxide (NiO x ) is one of the most promising hole transport materials for inverted perovskite solar cells (PSCs). However, its application is severely restrained due to unfavorable interfacial reactions and insufficient charge carrier extraction. Herein, a multifunctional modification at the NiO x /perovskite interface is developed via introducing fluorinated ammonium salt ligand to synthetically solve the obstacles. Specifically, the interface modification can chemically convert detrimental Ni ≥3+ to lower oxidation state, resulting in the elimination of interfacial redox reactions. Meanwhile, interfacial dipole is incorporated simultaneously to tune the work function of NiO x and optimize energy level alignment, which effectively promotes the charge carrier extraction. Therefore, the modified NiO x ‐based inverted PSCs achieve a remarkable power conversion efficiency (PCE) of 22.93%. Moreover, the unencapsulated devices obtain a significantly enhanced long‐term stability, maintaining over 85% and 80% of the initial PCEs after storage in ambient air with a high relative humidity of 50–60% for 1000 h and continuous operation at maximum power point under one‐sun illumination for 700 h, respectively.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, 518055, China.
- Department of Electrical and Electronic Engineering, The University of Hong Kong, Hong Kong, 999077, China.
- Key University Laboratory of Highly Efficient Utilization of Solar Energy and Sustainable Development of Guangdong, Southern University of Science and Technology, Shenzhen, 518055, China.
Förderung
- National Key Research and Development Project from the Ministry of Science and Technology of China
- National Natural Science Foundation of China
- Basic and Applied Basic Research Foundation of Guangdong Province
- Key Fundamental Research Project funding from the Shenzhen Science and Technology Innovation Committee
- General Research Fund
- Collaborative Research Fund
- Innovation and Technology Fund
Zitieren
APA
Jiang, Z., Wang, D., Sun, J., Hu, B., Zhang, L., Zhou, X., Wu, J., Hu, H., Zhang, J., Choy, W. C. H., & Xu, B. (2024). Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiO x /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells. Small Methods, 8(2). https://doi.org/10.1002/smtd.202300241
Vancouver
Jiang Z, Wang D, Sun J, Hu B, Zhang L, Zhou X, et al. Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiO x /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells. Small Methods. 2024;8(2). doi:10.1002/smtd.202300241
BibTeX
@article{Jiang2024,
author = {Jiang, Zhengyan and Wang, Deng and Sun, Jiayun and Hu, Bihua and Zhang, Luozheng and Zhou, Xianyong and Wu, Jiawen and Hu, Hang and Zhang, Jiyao and Choy, Wallace C H and Xu, Baomin},
title = {Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiO x /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells},
journal = {Small Methods},
year = {2024},
volume = {8},
number = {2},
doi = {10.1002/smtd.202300241}
}
EUVIMED