Structure Design for Ultrahigh Power Density Proton Exchange Membrane Fuel Cell
Small Methods · 2023-03 · 7 (3)
DOI: 10.1002/smtd.202201537 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 06.01.2023. Verfasst von Guobin Zhang und 15 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Engines, Tianjin University, Tianjin, 300350, China. Die Arbeit wurde bisher 62-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Tianjin (China) for Distinguished Young Scholars, Project funded by China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Next‐generation ultrahigh power density proton exchange membrane fuel cells rely not only on high‐performance membrane electrode assembly (MEA) but also on an optimal cell structure. To this end, this work comprehensively investigates the cell performance under various structures, and it is revealed that there is unexploited performance improvement in structure design because its positive effect enhancing gas supply is often inhibited by worse proton/electron conduction. Utilizing fine channel/rib or the porous flow field is feasible to eliminate the gas diffusion layer (GDL) and hence increase the power density significantly due to the decrease of cell thickness and gas/electron transfer resistances. The cell structure combining fine channel/rib, GDL elimination and double‐cell structure is believed to increase the power density from 4.4 to 6.52 kW L −1 with the existing MEA, showing nearly equal importance with the new MEA development in achieving the target of 9.0 kW L −1 .
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Engines, Tianjin University, Tianjin, 300350, China.
- MOE Key Laboratory of Thermo-Fluid Science and Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an, 710049, China.
- Department of Mechanical and Aerospace Engineering, University of California, Davis, CA, 95616, USA.
- Department of Mechanical Engineering, Imperial College London, London, SW7 2AZ, UK.
- Department of Mechanical Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong SAR, China.
- Department of Chemical Engineering, Loughborough University, Loughborough, LE11 3TU, UK.
ORCID-Profile: Guobin Zhang
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Tianjin (China) for Distinguished Young Scholars
- Project funded by China Postdoctoral Science Foundation
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Zhang, G., Wu, L., Tongsh, C., Qu, Z., Wu, S., Xie, B., Huo, W., Du, Q., Wang, H., An, L., Wang, N., Xuan, J., Chen, W., Xi, F., Wang, Z., & Jiao, K. (2023). Structure Design for Ultrahigh Power Density Proton Exchange Membrane Fuel Cell. Small Methods, 7(3). https://doi.org/10.1002/smtd.202201537
Vancouver
Zhang G, Wu L, Tongsh C, Qu Z, Wu S, Xie B, et al. Structure Design for Ultrahigh Power Density Proton Exchange Membrane Fuel Cell. Small Methods. 2023;7(3). doi:10.1002/smtd.202201537
BibTeX
@article{Zhang2023,
author = {Zhang, Guobin and Wu, Lizhen and Tongsh, Chasen and Qu, Zhiguo and Wu, Siyuan and Xie, Biao and Huo, Wenming and Du, Qing and Wang, Huizhi and An, Liang and Wang, Ning and Xuan, Jin and Chen, Wenmiao and Xi, Fuqiang and Wang, Zhixin and Jiao, Kui},
title = {Structure Design for Ultrahigh Power Density Proton Exchange Membrane Fuel Cell},
journal = {Small Methods},
year = {2023},
volume = {7},
number = {3},
doi = {10.1002/smtd.202201537}
}
EUVIMED