EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multifunctional Electrospun Phase Change Material Mats for Solar–Thermal Energy Storage and Photothermal Conversion

Hossein Baniasadi iD, Sedigheh Borandeh, Ziba Fathi, Roozbeh Abidnejad, Pedro E S Silva, Lauri Välinen, Jaana Vapaavuori, Eero Kontturi, Jukka Niskanen

Small Science · 2026-04 · 6 (4)

DOI: 10.1002/smsc.202500600 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Science, online erschienen am 17.04.2026. Verfasst von Hossein Baniasadi und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering Department of Chemical and Metallurgical Engineering Aalto University Espoo Finland. Die Arbeit nennt 108 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Suomen Akatemia, Business Finland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient solar–thermal energy conversion and storage demand materials that combine high latent heat with multifunctional performance were observed. Here, we report electrospun polyester‐based phase change material (PCM) mats capable of simultaneous thermal energy storage and photothermal conversion. Among a series of PCMs, PPCM1218 (from 1,12‐dodecanediol and octadecanedioic acid) showed the highest latent heat (157 J/g, melting point 90.6°C) and was incorporated into flexible, bead‐free mats via blending with polyamide 11 to prevent leakage. Mats with high PCM loading retained up to 132 J/g enthalpy while maintaining mechanical integrity. Functionalization with biochar, graphene, or polypyrrole (PPy) enhanced stiffness, electrical, and thermal conductivity, with PPy‐coated mats achieving 0.51 W/m·K and 18.5 S/m. Under 1.5 sun irradiation, surfaces exceeded 90°C, fully melting the PCM and demonstrating stable energy storage and release over 100 thermal and photothermal cycles. This approach offers a versatile platform for multifunctional electrospun mats suitable for high‐temperature energy storage, solar‐driven water purification, and thermal management applications.

Schlagwörter

Stichwörter der Autor:innen

electrospun matsmultifunctional materialsphase change materialsphotothermal conversionthermal energy storage

Autor:innen und Institutionen

  • School of Chemical Engineering Department of Chemical and Metallurgical Engineering Aalto University Espoo Finland.
  • School of Chemical Engineering Department of Bioproducts and Biosystems Aalto University Espoo Finland.
  • School of Chemical Engineering Department of Chemistry and Materials Science Aalto University Espoo Finland.

ORCID-Profile: Hossein Baniasadi

Förderung

  • Suomen Akatemia
  • Business Finland

Zitieren

APA

Baniasadi, H., Borandeh, S., Fathi, Z., Abidnejad, R., Silva, P. E. S., Välinen, L., Vapaavuori, J., Kontturi, E., & Niskanen, J. (2026). Multifunctional Electrospun Phase Change Material Mats for Solar–Thermal Energy Storage and Photothermal Conversion. Small Science, 6(4). https://doi.org/10.1002/smsc.202500600

Vancouver

Baniasadi H, Borandeh S, Fathi Z, Abidnejad R, Silva PES, Välinen L, et al. Multifunctional Electrospun Phase Change Material Mats for Solar–Thermal Energy Storage and Photothermal Conversion. Small Science. 2026;6(4). doi:10.1002/smsc.202500600

BibTeX
@article{Baniasadi2026,
  author = {Baniasadi, Hossein and Borandeh, Sedigheh and Fathi, Ziba and Abidnejad, Roozbeh and Silva, Pedro E S and Välinen, Lauri and Vapaavuori, Jaana and Kontturi, Eero and Niskanen, Jukka},
  title = {Multifunctional Electrospun Phase Change Material Mats for Solar–Thermal Energy Storage and Photothermal Conversion},
  journal = {Small Science},
  year = {2026},
  volume = {6},
  number = {4},
  doi = {10.1002/smsc.202500600}
}
Kostenlos starten →