EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D Printing Highly Efficient Ion‐Exchange Materials via a Polyelectrolyte Microphase Separation Strategy

Kenny Lee, Jitendra Mata, Valentin A Bobrin, Dipan Kundu, Vanessa K Peterson, Nathaniel Corrigan iD, Cyrille Boyer iD

Small Science · 2024-05 · 4 (5)

DOI: 10.1002/smsc.202400019 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Science, online erschienen am 10.03.2024. Verfasst von Kenny Lee und 6 weiteren Autor:innen. Beteiligte Einrichtung: Cluster for Advanced Macromolecular Design (CAMD) UNSW Australia Sydney NSW 2052 Australia. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ion‐exchange materials are commonly composed of polyelectrolyte networks in which crosslinking preserves macroscopic geometry and prevents dissolution in aqueous conditions. However, crosslinking inherently inhibits efficient swelling and mass transfer during ion‐exchange processes. Herein, a one‐step polymerization‐induced microphase separation (PIMS) approach directly using water and linear polystyrene sulfonate macromolecular chain transfer agents (macroCTAs) is developed to engineer bicontinuous nanostructured materials with rapid ion‐exchange capabilities. These materials feature water‐swollen liquid‐like polyelectrolyte domain embedded in a rigid polymer network, where the domain spacing, as determined by small angle X‐ray scattering experiments, is precisely modulated between 15 and 89 nm based on the molecular weight of the macroCTA used. As the bicontinuous nanostructure enables rapid mass transfer throughout the material bulk, the 3D printed PIMS materials are able to rapidly remove model charged dyes from solution, exhibiting a mass transfer coefficient ≈35 times higher than commercially available counterparts. This work is the first example demonstrating direct self‐assembly of water into continuous nanochannels in a well‐controlled manner as supported by time‐resolved small‐angle neutron scattering experiments during polymerization. Moreover, these nanostructured materials are readily produced using commercially available 3D printers, enabling unparalleled high‐resolution fabrication of targeted complex structures, including accurately controllable macroporous geometries and surface areas.

Schlagwörter

Stichwörter der Autor:innen

ion‐exchange materialsnanostructured materialspolymerization‐induced microphase separationreversible addition–fragmentation chain transfer polymerization

Autor:innen und Institutionen

  • Cluster for Advanced Macromolecular Design (CAMD) UNSW Australia Sydney NSW 2052 Australia.
  • Australian Centre for Neutron Scattering (ACNS) Australian Nuclear Science and Technology Organisation (ANSTO) Lucas Heights NSW 2234 Australia.
  • School of Mechanical and Manufacturing Engineering UNSW Sydney Kensington NSW 2052 Australia.
  • School of Chemical Engineering UNSW Sydney Kensington NSW 2052 Australia.
  • Australian Centre for NanoMedicine (ACN) School of Chemical Engineering UNSW Australia Sydney NSW 2052 Australia.

ORCID-Profile: Nathaniel Corrigan, Cyrille Boyer

Förderung

  • Australian Research Council

Zitieren

APA

Lee, K., Mata, J., Bobrin, V. A., Kundu, D., Peterson, V. K., Corrigan, N., & Boyer, C. (2024). 3D Printing Highly Efficient Ion‐Exchange Materials via a Polyelectrolyte Microphase Separation Strategy. Small Science, 4(5). https://doi.org/10.1002/smsc.202400019

Vancouver

Lee K, Mata J, Bobrin VA, Kundu D, Peterson VK, Corrigan N, et al. 3D Printing Highly Efficient Ion‐Exchange Materials via a Polyelectrolyte Microphase Separation Strategy. Small Science. 2024;4(5). doi:10.1002/smsc.202400019

BibTeX
@article{Lee2024,
  author = {Lee, Kenny and Mata, Jitendra and Bobrin, Valentin A and Kundu, Dipan and Peterson, Vanessa K and Corrigan, Nathaniel and Boyer, Cyrille},
  title = {3D Printing Highly Efficient Ion‐Exchange Materials via a Polyelectrolyte Microphase Separation Strategy},
  journal = {Small Science},
  year = {2024},
  volume = {4},
  number = {5},
  doi = {10.1002/smsc.202400019}
}
Kostenlos starten →