EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Unraveling the Origin of Donor‐Like Effect in Bismuth–Telluride‐Based Thermoelectric Materials

Feng Liu, Min Zhang, Pengfei Nan, Xin Zheng, Yuzheng Li, Kang Wu, Zhongkang Han, Binghui Ge, Xinbing Zhao, Chenguang Fu, Tiejun Zhu iD

Small Science · 2025-03 · 5 (3)

DOI: 10.1002/smsc.202300082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Science, online erschienen am 10.08.2023. Verfasst von Feng Liu und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Silicon and Advanced Semiconductor Materials School of Materials Science and Engineering Zhejiang University Hangzhou 310058 …. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The donor‐like effect, depicting the uncontrollable increase of electron density that can significantly alter the thermoelectric performance of both p‐type and n‐type polycrystalline Bi 2 Te 3 ‐based materials, has long been an intriguing phenomenon, while its origin is still elusive. Herein, it is found that different from the common argument, the donor‐like effect in Bi 2 Te 3 ‐based polycrystals is a result of the oxygen‐adsorption‐induced evolution of the point defects. The dominant point defect in stoichiometric zone‐melted Bi 2 Te 3 ingot is the acceptor‐like . During the fabrication of high‐strength polycrystals, the exposure of the powders to the air leads to their absorption of oxygen and the formation of secondary phase Bi 2 TeO 5 in the following sintering process. This brings about a change of local chemical equilibrium and promotes the evolution of the intrinsic point defect from acceptor‐like to donor‐like . Notably, if the fabrication process is strictly controlled to minimize oxygen adsorption, the evolution of the point defects will be avoided, whereby the donor‐like effect disappears. Consequently, a reproducible high zT value of 1.0 at 325 K can be achieved in Bi 2 Te 2.7 Se 0.3 ‐based polycrystals. These results highlight the importance of understanding the evolution of point defects, which is crucial for developing high‐performance Bi 2 Te 3 ‐based polycrystals and corresponding fabrication processes.

Schlagwörter

Stichwörter der Autor:innen

bismuth-telluridesdonor-like effectpoint defectsthermoelectric properties

Autor:innen und Institutionen

  • State Key Laboratory of Silicon and Advanced Semiconductor Materials School of Materials Science and Engineering Zhejiang University Hangzhou 310058 China.
  • Information Materials and Intelligent Sensing Laboratory of Anhui Province, Key Laboratory of Structure and Functional Regulation of Hybrid Materials of Ministry of Education, Institutes of Physical Science and Informat…
  • Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030000 China.

ORCID-Profile: Tiejun Zhu

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Liu, F., Zhang, M., Nan, P., Zheng, X., Li, Y., Wu, K., Han, Z., Ge, B., Zhao, X., Fu, C., & Zhu, T. (2025). Unraveling the Origin of Donor‐Like Effect in Bismuth–Telluride‐Based Thermoelectric Materials. Small Science, 5(3). https://doi.org/10.1002/smsc.202300082

Vancouver

Liu F, Zhang M, Nan P, Zheng X, Li Y, Wu K, et al. Unraveling the Origin of Donor‐Like Effect in Bismuth–Telluride‐Based Thermoelectric Materials. Small Science. 2025;5(3). doi:10.1002/smsc.202300082

BibTeX
@article{Liu2025,
  author = {Liu, Feng and Zhang, Min and Nan, Pengfei and Zheng, Xin and Li, Yuzheng and Wu, Kang and Han, Zhongkang and Ge, Binghui and Zhao, Xinbing and Fu, Chenguang and Zhu, Tiejun},
  title = {Unraveling the Origin of Donor‐Like Effect in Bismuth–Telluride‐Based Thermoelectric Materials},
  journal = {Small Science},
  year = {2025},
  volume = {5},
  number = {3},
  doi = {10.1002/smsc.202300082}
}
Kostenlos starten →