EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polarity‐engineered Sn‐Ti cluster photoresists for sub‐10‐nm high‐resolution lithography

Daohan Wang, Runfeng Xu, Min Zhang, Xiaofeng Gong, Wenzheng Li, Danhong Zhou, Jun Zhao, Huie Zhu iD, Zhan Lu, Pengzhong Chen iD, Xiaojun Peng iD

Smart Molecules · 18.05.2026

DOI: 10.1002/smo2.70061 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart Molecules, online erschienen am 18.05.2026. Verfasst von Daohan Wang und 10 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Fine Chemicals Frontiers Science Center for Smart Materials Dalian University of Technology Dalian China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High‐performance photoresists are essential for advancing semiconductor technology into the sub‐3‐nm process node. However, photoresist performance has long been constrained by the trade‐off among resolution (R), line edge roughness (L), and sensitivity (S), with the simultaneous enhancement of sensitivity and resolution remains a challenge. In this study, we propose a strategy to overcome the RLS trade‐off by enhancing the polarity of metal‐oxo clusters. A series of Sn‐Ti clusters with increasing polarity were synthesized by adjusting the bridging ligands and reducing the number of low‐polarity ligands. Experimental results confirm that, as the developer polarity decreases, higher polar Sn‐Ti clusters exhibit a more pronounced enhancement in sensitivity. The highest‐polarity cluster, TS‐3, undergoes a significant polarity switch upon exposure, enabling simultaneous improvement in sensitivity and resolution under lower‐polarity developers, ultimately breaking the conventional RLS trade‐off. TS‐3 delivers superior patterning performance in both electron beam lithography and extreme‐ultraviolet lithography, with a minimum linewidth of 8 nm. This study enhances the understanding of the solubility‐transition mechanism in cluster photoresists and provides a new approach for the development of high‐performance photoresists.

Schlagwörter

Stichwörter der Autor:innen

RLS trade‐offSn‐Ti cluster photoresistlithographymolecular polaritysensitivity enhancement

Autor:innen und Institutionen

  • State Key Laboratory of Fine Chemicals Frontiers Science Center for Smart Materials Dalian University of Technology Dalian China.
  • Shanghai Synchrotron Radiation Facility Shanghai Advanced Research Institute Chinese Academy of Sciences Shanghai China.
  • Zhangjiang Laboratory Shanghai China.
  • College of Materials Science and Engineering Shenzhen University Shenzhen China.

ORCID-Profile: Huie Zhu, Pengzhong Chen, Xiaojun Peng

Zitieren

APA

Wang, D., Xu, R., Zhang, M., Gong, X., Li, W., Zhou, D., Zhao, J., Zhu, H., Lu, Z., Chen, P., & Peng, X. (2026). Polarity‐engineered Sn‐Ti cluster photoresists for sub‐10‐nm high‐resolution lithography. Smart Molecules. https://doi.org/10.1002/smo2.70061

Vancouver

Wang D, Xu R, Zhang M, Gong X, Li W, Zhou D, et al. Polarity‐engineered Sn‐Ti cluster photoresists for sub‐10‐nm high‐resolution lithography. Smart Molecules. 2026. doi:10.1002/smo2.70061

BibTeX
@article{Wang2026,
  author = {Wang, Daohan and Xu, Runfeng and Zhang, Min and Gong, Xiaofeng and Li, Wenzheng and Zhou, Danhong and Zhao, Jun and Zhu, Huie and Lu, Zhan and Chen, Pengzhong and Peng, Xiaojun},
  title = {Polarity‐engineered Sn‐Ti cluster photoresists for sub‐10‐nm high‐resolution lithography},
  journal = {Smart Molecules},
  year = {2026},
  doi = {10.1002/smo2.70061}
}
Kostenlos starten →