Modulating Crystallization in Quasi‐2D Ruddlesden–Popper Perovskite Materials for High‐Performance and Scalable Printed Perovskite Solar Cells
Small · 05.11.2026
DOI: 10.1002/smll.76670 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 05.11.2026. Verfasst von Jubin Jang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Gwangju Institute of Science and Technology, Gwangju, Republic of Korea. Die Arbeit nennt 40 Literaturangaben. Gefördert von: National Research Foundation of Korea, Korea Institute of Energy Technology Evaluation and Planning, GIST ISD program of the Ministry of Science and ICT.
Abstract (Originalsprache)
Quasi‐2D Ruddlesden–Popper (2DRP) perovskites offer improved environmental stability in relation to their 3D counterparts. However, their multiple‐quantum‐well structure and insulating organic spacers inherently limit vertical charge transport, significantly reducing device performance in scalable printed films. Herein, we employ methylammonium chloride (MACl) as a crystallization‐modulating additive to overcome these transport bottlenecks in ambient printed 2DRP perovskite solar cells (PSCs). Focusing on an n = 9 2DRP absorber, MACl modulates precursor interactions involving organic spacers and guides phase evolution during film formation. This modulation yields a highly uniform phase distribution dominated by large‐n 2DRP phases while enhancing crystallinity and vertical orientation. Consequently, trap‐mediated recombination is significantly suppressed, leading to enhanced carrier mobility and facilitating efficient photocurrent generation. As a result, the optimized 1 cm 2 printed 2DRP‐based PSC achieves a remarkable power conversion efficiency (PCE) of 14.4%, in relation to the negligible PCE (0.4%) of the control device. Furthermore, this strategy is successfully validated across various compositions ( n = 2, 4, 5, and 7), demonstrating a versatile and broadly applicable route for the development of high‐performance, scalable printed 2DRP‐based PSCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Gwangju Institute of Science and Technology, Gwangju, Republic of Korea.
- Research Institute of Solar and Sustainable Energies (RISE), Gwangju Institute of Science and Technology, Gwangju, Republic of Korea.
- Heeger Center for Advanced Materials, Gwangju Institute of Science and Technology, Gwangju, Republic of Korea.
- Department of Physics, Chemistry and Biology (IFM), Linköping University, Linköping, Sweden.
- Department of Chemistry, Gwangju Institute of Science and Technology, Gwangju, Republic of Korea.
ORCID-Profile: Jubin Jang, Taeyoon Ki, Sanseong Lee, Heejoo Kim, Hongkyu Kang, Kwanghee Lee
Förderung
- National Research Foundation of Korea
- Korea Institute of Energy Technology Evaluation and Planning
- GIST ISD program of the Ministry of Science and ICT
- Technology Development Program
- Ministry of Trade, Industry and Energy
Zitieren
APA
Jang, J., Kim, J. H., Ki, T., Lee, S., Oh, J., Kim, H., Kang, H., & Lee, K. (2026). Modulating Crystallization in Quasi‐2D Ruddlesden–Popper Perovskite Materials for High‐Performance and Scalable Printed Perovskite Solar Cells. Small. https://doi.org/10.1002/smll.76670
Vancouver
Jang J, Kim JH, Ki T, Lee S, Oh J, Kim H, et al. Modulating Crystallization in Quasi‐2D Ruddlesden–Popper Perovskite Materials for High‐Performance and Scalable Printed Perovskite Solar Cells. Small. 2026. doi:10.1002/smll.76670
BibTeX
@article{Jang2026,
author = {Jang, Jubin and Kim, Ju-Hyeon and Ki, Taeyoon and Lee, Sanseong and Oh, Juhui and Kim, Heejoo and Kang, Hongkyu and Lee, Kwanghee},
title = {Modulating Crystallization in Quasi‐2D Ruddlesden–Popper Perovskite Materials for High‐Performance and Scalable Printed Perovskite Solar Cells},
journal = {Small},
year = {2026},
doi = {10.1002/smll.76670}
}
EUVIMED