A Multifunctional Epoxy–Polyether Network for Chemo‐Mechanical Stabilization of High‐Loading Ni‐Rich Cathodes
Small · 13.11.2026
DOI: 10.1002/smll.76504 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 13.11.2026. Verfasst von Chang-Wan Sun und 5 weiteren Autor:innen. Beteiligte Einrichtung: Composites & Convergence Materials Research Division, Korea Institute of Materials Science (KIMS), Changwon, Republic of Korea. Die Arbeit nennt 56 Literaturangaben. Gefördert von: Korean Institute of Materials Science, Ministry of Trade, Industry & Energy.
Abstract (Originalsprache)
High‐loading Ni‐rich cathodes are constrained by coupled ion‐transport limitations, mechanical damage, and interfacial degradation, whereas conventional poly(vinylidene fluoride) (PVDF) binders primarily provide passive particle adhesion. Here, a fluorine‐free epoxy–polyether crosslinked binder network (X‐EP) is developed for high‐loading LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes. Formed through epoxy–amine ring‐opening reactions among bisphenol A diglycidyl ether, polyether‐based diglycidyl ether, and Jeffamine curing agents, X‐EP integrates ion‐accessible polyether segments, hydroxyl‐rich interfacial functionality, and mechanical resilience. Relative to PVDF, X‐EP shows higher electrolyte affinity, Mn 2+ ‐binding capability, binder‐film ionic conductivity, mechanical resilience, and calculated adhesion to NCM811, resulting in reduced polarization and improved apparent Li + transport kinetics. In half cells, X‐EP retains 80.98% of its initial capacity after 100 cycles, compared with 32.30% for PVDF. At an areal loading of ≈20 mg cm −2 , X‐EP retains 78.43% capacity after 400 cycles in coin‐type full cells and 78.29% after 150 cycles in pouch‐type full cells. Post‐mortem analyses reveal suppressed intergranular cracking and interphase growth, together with better preservation of the layered structure. These findings demonstrate a binder‐design strategy that couples ion accessibility, interfacial affinity, and mechanical resilience to stabilize high‐loading Ni‐rich cathodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Composites & Convergence Materials Research Division, Korea Institute of Materials Science (KIMS), Changwon, Republic of Korea.
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan, Republic of Korea.
- Next Generation Battery Research Center, Korea Electrotechnology Research Institute (KERI), Changwon, Republic of Korea.
- Electric Energy Materials Engineering, KERI School, University of Science and Technology (UST), Daejeon, Republic of Korea.
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Gyeongbuk, Republic of Korea.
ORCID-Profile: Youngoh Kim, Jin-Woo Yi, Seung-Jae Shin, Jihee Yoon
Förderung
- Korean Institute of Materials Science
- Ministry of Trade, Industry & Energy
Zitieren
APA
Sun, C. W., Hwang, I., Kim, Y., Yi, J. W., Shin, S. J., & Yoon, J. (2026). A Multifunctional Epoxy–Polyether Network for Chemo‐Mechanical Stabilization of High‐Loading Ni‐Rich Cathodes. Small. https://doi.org/10.1002/smll.76504
Vancouver
Sun CW, Hwang I, Kim Y, Yi JW, Shin SJ, Yoon J. A Multifunctional Epoxy–Polyether Network for Chemo‐Mechanical Stabilization of High‐Loading Ni‐Rich Cathodes. Small. 2026. doi:10.1002/smll.76504
BibTeX
@article{Sun2026,
author = {Sun, Chang-Wan and Hwang, Insung and Kim, Youngoh and Yi, Jin-Woo and Shin, Seung-Jae and Yoon, Jihee},
title = {A Multifunctional Epoxy–Polyether Network for Chemo‐Mechanical Stabilization of High‐Loading Ni‐Rich Cathodes},
journal = {Small},
year = {2026},
doi = {10.1002/smll.76504}
}
EUVIMED