Programming Closed Pores in Hard Carbon Anodes via Alcohol‐Regulated Interfacial Assembly for High‐Rate and Durable Sodium‐Ion Storage
Small · 31.10.2026
DOI: 10.1002/smll.76471 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 31.10.2026. Verfasst von Senchuan Huang und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Sustainable Transformation, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, People's …. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China (NSFC), Guangdong Basic and Applied Basic Research Foundation, One-Hundred Young Talents Program Foundation of Guangdong University of Technology.
Abstract (Originalsprache)
Closed pores are widely recognized as the primary structural domains responsible for the low‐voltage plateau capacity of hard carbon anodes for sodium‐ion batteries (SIBs). However, current strategies for constructing closed pores predominantly rely on post‐carbonization reconstruction, offering limited control over pore accessibility and interfacial chemistry. Here we demonstrate that closed pores can instead be programmed during the precursor assembly process via an alcohol‐regulated interfacial assembly strategy. By systematically modulating the alcohol/water solvent environment, hydrogen‐bond interactions, micelle swelling behavior, and pyrrole polymerization kinetics are cooperatively regulated, enabling programmable precursor confinement and the subsequent transformation of micelle‐pyrrole assemblies into closed‐pore‐rich hard carbons during carbonization. The optimized hard carbon exhibits abundant closed ultramicropores that not only facilitate the quasi‐metallic sodium cluster filling but also promote the formation of a thin inorganic‐rich solid electrolyte interphase (SEI) layer, thereby accelerating sodium‐storage kinetics. As a result, it delivers an outstanding rate capability of 119 mAh g −1 at 10 A g −1 and robust cycling stability over 6000 cycles at 5 A g −1 , as well as excellent low‐temperature performance at −20°C. This work establishes precursor organization programming as a general strategy for constructing closed pores in hard carbon materials toward fast‐charging and long‐life SIBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Sustainable Transformation, School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, People's Republic of China.
- Guangdong Provincial Laboratory of Chemistry and Fine Chemical Engineering Jieyang Center, Jieyang, People's Republic of China.
- School of Materials and Energy, Guangdong University of Technology, Guangzhou, People's Republic of China.
- Australian Institute For Bioengineering and Nanotechnology, University of Queensland, Bribane, Queensland, Australia.
ORCID-Profile: Senchuan Huang, Cheng Zhang, Shanqing Zhang
Förderung
- National Natural Science Foundation of China (NSFC)
- Guangdong Basic and Applied Basic Research Foundation
- One-Hundred Young Talents Program Foundation of Guangdong University of Technology
Zitieren
APA
Huang, S., Huang, Q., Pei, K., Chen, W., Cao, Y., Li, M., Zhang, C., & Zhang, S. (2026). Programming Closed Pores in Hard Carbon Anodes via Alcohol‐Regulated Interfacial Assembly for High‐Rate and Durable Sodium‐Ion Storage. Small. https://doi.org/10.1002/smll.76471
Vancouver
Huang S, Huang Q, Pei K, Chen W, Cao Y, Li M, et al. Programming Closed Pores in Hard Carbon Anodes via Alcohol‐Regulated Interfacial Assembly for High‐Rate and Durable Sodium‐Ion Storage. Small. 2026. doi:10.1002/smll.76471
BibTeX
@article{Huang2026,
author = {Huang, Senchuan and Huang, Qihang and Pei, Kewei and Chen, Wenyi and Cao, Yangfei and Li, Meng and Zhang, Cheng and Zhang, Shanqing},
title = {Programming Closed Pores in Hard Carbon Anodes via Alcohol‐Regulated Interfacial Assembly for High‐Rate and Durable Sodium‐Ion Storage},
journal = {Small},
year = {2026},
doi = {10.1002/smll.76471}
}
EUVIMED