Electrochemical Stabilization of PTFE in Thick Dry‐Processed Hard Carbon Electrodes via Inorganic‐Rich SEI Engineering for Scalable and Durable Sodium‐Ion Batteries
Small · 2026-11 · 22 (61)
DOI: 10.1002/smll.75459 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 26.08.2026. Verfasst von Xiongwen Xu und 8 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Hunan Joint International Laboratory of Advanced Materials and Technology of Clean Energy, Hunan Provin…. Die Arbeit nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Hunan Provincial Innovation Foundation for Postgraduate.
Abstract (Originalsprache)
Polytetrafluoroethylene (PTFE)‐based dry‐process electrode manufacturing represents a promising strategy for the low‐cost, scalable production of high‐loading electrodes. However, the practical application of high‐loading dry‐processed hard carbon (HC) anodes in sodium‐ion batteries is still hindered by their unsatisfactory electrochemical performance, while the mechanism underlying performance fading remains unclear. Here, dry‐processed sodium iron pyrophosphate phosphate (NFPP) cathodes and HC anodes were fabricated via PTFE fibrillation and their Na + storage performance were systematically evaluated from electrode to pouch cell level. The dry electrodes exhibited superior kinetics and high‐loading capability. Importantly, NFPP performance remained unaffected, while dry‐processed HC suffered from capacity decay, originating from side reactions between PTFE and sodiated HC. Guided by this insight, an optimized electrolyte was developed to form a stable inorganic‐rich SEI that suppresses PTFE reduction, thereby enabling high‐loading dry electrodes with high energy density and excellent electrochemical performance, as evidenced by a capacity retention exceeding 83% after 1700 cycles at 45°C in a 1000 mAh sodium‐ion pouch cell.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Hunan Joint International Laboratory of Advanced Materials and Technology of Clean Energy, Hunan Province Key Laboratory for Advanced Carbon Materials and Applied Technology…
- Hunan Jidian Special Energy Technology Co., Ltd, Changsha, China.
- LI-FUN Technology Corporation Limited, Zhuzhou, China.
ORCID-Profile: Xiongwen Xu, Peng Gao, Aiping Hu, Jilei Liu
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Hunan Provincial Innovation Foundation for Postgraduate
Zitieren
APA
Xu, X., Mo, Y., Zhou, W., Liu, S., Nie, Y., Tu, J., Gao, P., Hu, A., & Liu, J. (2026). Electrochemical Stabilization of PTFE in Thick Dry‐Processed Hard Carbon Electrodes via Inorganic‐Rich SEI Engineering for Scalable and Durable Sodium‐Ion Batteries. Small, 22(61). https://doi.org/10.1002/smll.75459
Vancouver
Xu X, Mo Y, Zhou W, Liu S, Nie Y, Tu J, et al. Electrochemical Stabilization of PTFE in Thick Dry‐Processed Hard Carbon Electrodes via Inorganic‐Rich SEI Engineering for Scalable and Durable Sodium‐Ion Batteries. Small. 2026;22(61). doi:10.1002/smll.75459
BibTeX
@article{Xu2026,
author = {Xu, Xiongwen and Mo, Ying and Zhou, Wang and Liu, Sangsang and Nie, Yang and Tu, Jian and Gao, Peng and Hu, Aiping and Liu, Jilei},
title = {Electrochemical Stabilization of PTFE in Thick Dry‐Processed Hard Carbon Electrodes via Inorganic‐Rich SEI Engineering for Scalable and Durable Sodium‐Ion Batteries},
journal = {Small},
year = {2026},
volume = {22},
number = {61},
doi = {10.1002/smll.75459}
}
EUVIMED