EUVIMEDEUVIMED entdecken
Crossref

Achieving High Energy Density and Superior Electrochemical Performance in P2‐Type Fe–Mn Cathodes via Li–Ti Co‐Doping

Amit Ghoshal iD, Utsab Sarkar iD, Sayan Maji iD, Surajit Ghosh iD, Anirudha Ghosh, Urmimala Maitra iD

Small · 05.08.2026

DOI: 10.1002/smll.74980 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 05.08.2026. Verfasst von Amit Ghoshal und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Sciences, Indian Association for the Cultivation of Science, Kolkata, India. Die Arbeit nennt 44 Literaturangaben. Gefördert von: Science and Engineering Research Board, Department of Science and Technology, Department of Science and Technology, Government of West Bengal.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Co‐ and Ni‐free P2‐type Fe–Mn based sodium layered oxides are promising cathodes for sustainable, low‐cost sodium‐ion batteries. Despite years of research, these cathodes still suffer from irreversible phase transitions and severe transition‐metal migration, particularly Fe 4+ migration at high voltages, causing rapid capacity decay and pronounced voltage hysteresis. In this work, a Li + –Ti 4+ co‐doped P2 cathode, Na 0.75 Li 0.2 Fe 0.15 Mn 0.55 Ti 0.1 O 2 , is synthesized, which fundamentally stabilizes the Fe–Mn framework. A dynamic Li + suppresses Fe migration, while d 0 ‐Ti 4+ accommodates lattice strains preventing structural transitions. Additionally, Ti 4+ substitution expands Na‐layer spacing improving Na‐diffusivity. The co‐doped cathode also accommodates higher Na content, delivering enhanced reversible capacity and a high energy density of 526 W h kg −1 . It exhibits accelerated Na + diffusion (D Na + ≈ 10 −10 cm 2 s −1 ), low polarization, and superior cycling stability compared to undoped and singly doped analogues. Even under high‐voltage operation, the unit‐cell volume changes by 85% capacity at 1C, >76% at 5C over 100 cycles and >90% capacity in full‐cell operation at C/2. The study therefore demonstrates Li–Ti co‐doping as an effective strategy to enable high‐voltage, structurally stable P2‐type Fe–Mn cathodes for low‐cost sustainable sodium‐ion batteries.

Schlagwörter

Stichwörter der Autor:innen

Na‐ion batteryP2 sodium layered cathodeco‐dopingelectrochemical impedance spectraphase transition

Autor:innen und Institutionen

  • School of Materials Sciences, Indian Association for the Cultivation of Science, Kolkata, India.
  • MAX IV Laboratory, Lund University, Lund, Sweden.

ORCID-Profile: Amit Ghoshal, Utsab Sarkar, Sayan Maji, Surajit Ghosh, Urmimala Maitra

Förderung

  • Science and Engineering Research Board
  • Department of Science and Technology
  • Department of Science and Technology, Government of West Bengal

Zitieren

APA

Ghoshal, A., Sarkar, U., Maji, S., Ghosh, S., Ghosh, A., & Maitra, U. (2026). Achieving High Energy Density and Superior Electrochemical Performance in P2‐Type Fe–Mn Cathodes via Li–Ti Co‐Doping. Small. https://doi.org/10.1002/smll.74980

Vancouver

Ghoshal A, Sarkar U, Maji S, Ghosh S, Ghosh A, Maitra U. Achieving High Energy Density and Superior Electrochemical Performance in P2‐Type Fe–Mn Cathodes via Li–Ti Co‐Doping. Small. 2026. doi:10.1002/smll.74980

BibTeX
@article{Ghoshal2026,
  author = {Ghoshal, Amit and Sarkar, Utsab and Maji, Sayan and Ghosh, Surajit and Ghosh, Anirudha and Maitra, Urmimala},
  title = {Achieving High Energy Density and Superior Electrochemical Performance in P2‐Type Fe–Mn Cathodes via Li–Ti Co‐Doping},
  journal = {Small},
  year = {2026},
  doi = {10.1002/smll.74980}
}
Kostenlos starten →