Binder Design in Extrusion‐Based 3D Printing of Electrodes: Enhancing Printability and Electrochemical Performance in Energy Storage Devices
Small · 31.07.2026
DOI: 10.1002/smll.74764 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Small, online erschienen am 31.07.2026. Verfasst von Akesh Manimendra Badalge und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Environment and Science, Griffith University, Brisbane South (Nathan), Queensland, Australia. Die Arbeit nennt 142 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Research Council Discovery Project, Griffith University PhD Scholarships.
Abstract (Originalsprache)
Binder design, encompassing the selection, modification, or engineering of binder materials and their nanostructured architecture, plays a pivotal role in determining the multifunctional performance of electrodes in energy storage devices (ESDs). As 3D printing emerges as an enabling technology for complex, customizable electrode architectures, the binder design becomes the main controllable element, governing printability, manufacturability, and electrochemical performance. In extrusion‐based approaches such as direct ink writing (DIW), binder‐driven rheology critically influences ink flow, filament stability, and structural fidelity, while fast charge‐transfer kinetics and interfacial behavior shape the resulting electrochemical response. This review covers recent advances in binder design strategies that enhance both the printability and performance of 3D printed ESD electrodes, with particular emphasis on the promising transferability of conventional electrode fabrication slurries into 3D printable inks and development of porous hierarchical structures. It further examines how binder chemistry can address persistent challenges in emerging battery systems including pulverization in silicon anodes, dendrite formation in zinc‐based systems, low‐capacity retention, and limited mass loading. By integrating insights across synthetic, natural, and specialty binder systems, this review highlights the design principles required for next‐generation binder materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Environment and Science, Griffith University, Brisbane South (Nathan), Queensland, Australia.
- School of Engineering and Built Environment, Griffith University, Gold Coast, Queensland, Australia.
ORCID-Profile: Akesh Manimendra Badalge, Timothy J Biddle, Huynh Tam Minh Nguyen, Eric Campbell, Munkhbayar Batmunkh, Tak Kim, Stefanie Feih, Yu Lin Zhong
Förderung
- Australian Research Council Discovery Project
- Griffith University PhD Scholarships
Zitieren
APA
Manimendra Badalge, A., Biddle, T. J., Nguyen, H. T. M., Campbell, E., Batmunkh, M., Kim, T., Feih, S., & Zhong, Y. L. (2026). Binder Design in Extrusion‐Based 3D Printing of Electrodes: Enhancing Printability and Electrochemical Performance in Energy Storage Devices. Small. https://doi.org/10.1002/smll.74764
Vancouver
Manimendra Badalge A, Biddle TJ, Nguyen HTM, Campbell E, Batmunkh M, Kim T, et al. Binder Design in Extrusion‐Based 3D Printing of Electrodes: Enhancing Printability and Electrochemical Performance in Energy Storage Devices. Small. 2026. doi:10.1002/smll.74764
BibTeX
@article{ManimendraBadalge2026,
author = {Manimendra Badalge, Akesh and Biddle, Timothy J and Nguyen, Huynh Tam Minh and Campbell, Eric and Batmunkh, Munkhbayar and Kim, Tak and Feih, Stefanie and Zhong, Yu Lin},
title = {Binder Design in Extrusion‐Based 3D Printing of Electrodes: Enhancing Printability and Electrochemical Performance in Energy Storage Devices},
journal = {Small},
year = {2026},
doi = {10.1002/smll.74764}
}
EUVIMED