EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Bio‐Inspired Mesoporous Solar Evaporator Enabled by Upcycled PET

Sungdo Kim, Sourav Chaule iD, YuJi Han, Yong Soo Kim iD, Ji-Hyun Jang iD

Small · 2026-09 · 22 (51)

DOI: 10.1002/smll.74735 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 28.07.2026. Verfasst von Sungdo Kim und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Chemical Engineering, Graduate School of Semiconductor Materials and Device Engineering, Graduate School of Carbon Neutrality, U…. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation of Korea, Korea government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solar‐driven interfacial steam generation (ISSG) has emerged as a promising strategy for decentralized freshwater production. However, developing scalable solar evaporators that combine high evaporation performance, environmental compatibility, and stable operation under varying solar angles remains challenging. Here, we report a compound‐eye‐inspired three‐dimensional solar evaporator based on graphite‐containing PET nanofoam (GPF). The GPF was produced by upcycling polyethylene terephthalate (PET) waste. The nonsolvent‐induced phase separation process produces a mesoporous and moldable structure with tunable water transport properties, enabling the construction of hemispherical multi‐surface evaporators. This architecture provides angle‐insensitive solar exposure and an enlarged water‐wetted evaporative interface within a fixed projected footprint. As a result, the optimized evaporator achieved a projected‐area‐normalized evaporation rate of 3.44 kg m − 2 h − 1 under 1‐sun illumination. In outdoor operation, the integrated evaporation‐condensation module produced a freshwater yield of up to 24.4 kg m − 2 over 14 h under natural sunlight. The enhanced performance arises from the combined effects of expanded evaporation‐active area, capillary‐sustained water transport, side‐surface evaporation, and internal heat redistribution. This result indicates that the 3D‐CE improves evaporation through coupled transport and thermal effects, rather than through surface‐area enlargement alone. This work presents a potential route for converting waste PET into functional solar evaporators for decentralized freshwater production.

Schlagwörter

Stichwörter der Autor:innen

bio‐inspired 3d‐compound‐eye structureinterfacial solar steam generationnano‐porous structurepet waste upcycling

Autor:innen und Institutionen

  • School of Energy and Chemical Engineering, Graduate School of Semiconductor Materials and Device Engineering, Graduate School of Carbon Neutrality, UNIST, Ulsan, Republic of Korea.
  • Department of Semiconductor Physics & Engineering and Energy Harvest-Storage Research Center, University of Ulsan, Ulsan, Republic of Korea.

ORCID-Profile: Sourav Chaule, Yong Soo Kim, Ji-Hyun Jang

Förderung

  • National Research Foundation of Korea
  • Korea government

Zitieren

APA

Kim, S., Chaule, S., Han, Y., Kim, Y. S., & Jang, J. H. (2026). Bio‐Inspired Mesoporous Solar Evaporator Enabled by Upcycled PET. Small, 22(51). https://doi.org/10.1002/smll.74735

Vancouver

Kim S, Chaule S, Han Y, Kim YS, Jang JH. Bio‐Inspired Mesoporous Solar Evaporator Enabled by Upcycled PET. Small. 2026;22(51). doi:10.1002/smll.74735

BibTeX
@article{Kim2026,
  author = {Kim, Sungdo and Chaule, Sourav and Han, YuJi and Kim, Yong Soo and Jang, Ji-Hyun},
  title = {Bio‐Inspired Mesoporous Solar Evaporator Enabled by Upcycled PET},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {51},
  doi = {10.1002/smll.74735}
}
Kostenlos starten →