Strain‐Regulated La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ for Sr Stable and CO 2 ‐Tolerant Oxygen Electrode in Reversible Solid Oxide Cells
Small · 2026-08 · 22 (46)
DOI: 10.1002/smll.74259 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 18.06.2026. Verfasst von Xinyue Dang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering and Technology, Xi'an Jiaotong University, Xi'an, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: Project of Shaanxi Innovative Talent Promotion Plan-Technology Innovation Team, Key Scientific and Technological Project of Shaanxi Province, Key Research and Development Program of Shaanxi Province.
Abstract (Originalsprache)
Reversible solid oxide cells (Re‐SOCs) are promising devices for efficient energy conversion and CO 2 utilization. However, conventional La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ (LSCF) oxygen electrodes suffer from severe Sr surface segregation and CO 2 poisoning, which lead to the formation of insulating SrCO 3 and rapid performance degradation. Herein, an ordered macroporous LSCF oxygen electrode (LSCF@PMMA) is constructed via a template‐assisted strategy to regulate lattice strain and surface stability. The macroporous architecture introduces compressive lattice strain and well‐defined mass‐transport channels, which enlarge the triple‐phase boundaries (TPBs). Structural analyses and detailed theoretical calculations reveal that the strain‐enhanced O‐2p‐M‐3d hybridization lowers the energy barriers for oxygen adsorption and dissociation while increasing the Sr migration barrier. Time‐of‐Flight Secondary Ion Mass Spectrometry (TOF‐SIMS) and in situ Raman further verify that suppressed Sr segregation effectively enhances CO 2 tolerance. As a result, the single‐cell with the LSCF@PMMA electrode delivers a peak power density of 1.22 W cm −2 at 850°C in fuel cell (FC) mode and a current density of 3.35 A cm −2 at 1.8 V for CO 2 electrolysis, while also exhibiting negligible degradation over 150 h in FC mode and excellent stability during reversible operation. This work highlights strain‐engineered as an effective strategy for developing intermediate‐temperature CO 2 ‐tolerant electrodes in Re‐SOCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemical Engineering and Technology, Xi'an Jiaotong University, Xi'an, China.
- State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an, China.
ORCID-Profile: Zhan Gao
Förderung
- Project of Shaanxi Innovative Talent Promotion Plan-Technology Innovation Team
- Key Scientific and Technological Project of Shaanxi Province
- Key Research and Development Program of Shaanxi Province
- Xianyang City Qindu District Science and Technology Plan Project
- Xi'an Key Industrial Chain Technology Development General Project
Zitieren
APA
Dang, X., Jiang, Y., Luo, J., & Gao, Z. (2026). Strain‐Regulated La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ for Sr Stable and CO 2 ‐Tolerant Oxygen Electrode in Reversible Solid Oxide Cells. Small, 22(46). https://doi.org/10.1002/smll.74259
Vancouver
Dang X, Jiang Y, Luo J, Gao Z. Strain‐Regulated La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ for Sr Stable and CO 2 ‐Tolerant Oxygen Electrode in Reversible Solid Oxide Cells. Small. 2026;22(46). doi:10.1002/smll.74259
BibTeX
@article{Dang2026,
author = {Dang, Xinyue and Jiang, Yuying and Luo, Jia and Gao, Zhan},
title = {Strain‐Regulated La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ for Sr Stable and CO 2 ‐Tolerant Oxygen Electrode in Reversible Solid Oxide Cells},
journal = {Small},
year = {2026},
volume = {22},
number = {46},
doi = {10.1002/smll.74259}
}
EUVIMED