EUVIMEDEUVIMED entdecken
Open Access

High‐Capacity Lithium‐Sulfur Battery Cathode: Sulfurized Polyacrylonitrile Aerogel Based on Regulation of Aggregated Structure

Yan Ma, Jie Zhang, Yuanyou Peng, Guang Liu, Weiyuan Yu, Fen Ran

Small · 2026-07 · 22 (42)

DOI: 10.1002/smll.74169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 09.06.2026. Verfasst von Yan Ma und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Green Energy and Energy Storage, Energy Storage Institute of Lanzhou University of Technology, Lanzhou University of Technology, Lanzhou, C…. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sulfurized polyacrylonitrile is considered one of the most promising cathode materials for lithium‐sulfur batteries due to its high electronic conductivity, minimal polysulfide shuttling, high reversible specific capacity, and excellent cycling stability. However, its practical application is hindered by volume expansion during battery operation. To address this issue, a sulfurized polyacrylonitrile cathode with a porous framework is designed via solvent/non‐solvent exchange regulation, where by using high‐pressure spray‐assisted phase separation, an amorphous‐dominated 3D interpenetrating aerogel is constructed. This architecture facilitates continuous and rapid charge transfer as well as efficient electrolyte infiltration, and the porous skeleton helps accommodate volume changes during charge‐discharge cycles. As a result, the sulfurized polyacrylonitrile aerogel cathode achieves a capacity retention of over 92.3% after 700 cycles at 0.5 C and delivers an initial energy density of 790.8 Wh kg − 1 at 0.2 C. In a full‐cell configuration with a prelithiated graphite anode, a reversible capacity as high as 1014 mAh g − 1 with greater than 94.8% capacity retention is maintained after 180 cycles at 0.2 C. This work highlights the importance of rational electrode microstructure engineering and provides an effective strategy for developing high‐performance sulfurized polyacrylonitrile cathodes in lithium‐sulfur batteries.

Schlagwörter

Stichwörter der Autor:innen

cathode materialslithium‐sulfur batteriesspray‐phase inversionsulfurized polyacrylonitrile

Autor:innen und Institutionen

  • School of Green Energy and Energy Storage, Energy Storage Institute of Lanzhou University of Technology, Lanzhou University of Technology, Lanzhou, China.
  • School of Materials Science and Engineering, State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou, China.
  • State Key Laboratory of Bioinspired Interfacial Materials Science, School of Chemistry, Beihang University, Beijing, China.
  • School of Materials Science and Engineering, Shaanxi University of Technology, Hanzhong, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Ma, Y., Zhang, J., Peng, Y., Liu, G., Yu, W., & Ran, F. (2026). High‐Capacity Lithium‐Sulfur Battery Cathode: Sulfurized Polyacrylonitrile Aerogel Based on Regulation of Aggregated Structure. Small, 22(42). https://doi.org/10.1002/smll.74169

Vancouver

Ma Y, Zhang J, Peng Y, Liu G, Yu W, Ran F. High‐Capacity Lithium‐Sulfur Battery Cathode: Sulfurized Polyacrylonitrile Aerogel Based on Regulation of Aggregated Structure. Small. 2026;22(42). doi:10.1002/smll.74169

BibTeX
@article{Ma2026,
  author = {Ma, Yan and Zhang, Jie and Peng, Yuanyou and Liu, Guang and Yu, Weiyuan and Ran, Fen},
  title = {High‐Capacity Lithium‐Sulfur Battery Cathode: Sulfurized Polyacrylonitrile Aerogel Based on Regulation of Aggregated Structure},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {42},
  doi = {10.1002/smll.74169}
}
Kostenlos starten →