Catalyst Layer Pore Design Based on Oxygen Mean Free Path for Low‐Pt HT‐PEMFCs
Small · 2026-07 · 22 (41)
DOI: 10.1002/smll.74023 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 02.06.2026. Verfasst von Xiaolin Dai und 7 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of New Energy Materials Service Safety, Shenzhen Key Laboratory of Polymer Science and Technology, College of Mat…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: National Natural Science Foundation of China, Shenzhen Science and Technology Program, Shenzhen Science and Technology Innovation Commission.
Abstract (Originalsprache)
Mass transport limitations critically restrict the performance of high‐temperature proton exchange membrane fuel cells (HT‐PEMFCs), primarily due to the mismatch between the oxygen mean free path and the pore size of conventional catalyst layers (CLs). This mismatch leads to severe Knudsen diffusion, particularly under low platinum (Pt) loadings. In this work, the mean free path of oxygen in the 100°C–200°C range is calculated to determine an optimal pore size of approximately 200 nm. Correspondingly, cumulative macropores are introduced into the CL using a sacrificial templating strategy, thereby enabling efficient gas diffusion. This mean‐free‐path‐informed design promotes molecular diffusion over restricted Knudsen diffusion, reducing oxygen transport resistance by 61.2% at a low Pt loading of 0.14 mg Pt cm −2 . As a result, peak power densities of 634 and 920 mW cm −2 are achieved at Pt loadings of 0.14 and 0.43 mg Pt cm −2 , respectively. The optimized electrode delivers an outstanding rated power density of 4.53 W mg Pt −1 , representing a 5.8‐fold enhancement compared with conventional commercial CLs. These findings demonstrate that a mean‐free‐path‐guided pore architecture offers an effective strategy for reducing Pt loading and advancing the commercialization of HT‐PEMFCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Key Laboratory of New Energy Materials Service Safety, Shenzhen Key Laboratory of Polymer Science and Technology, College of Materials Science and Engineering, Shenzhen University, Shenzhen, P. R. C…
- Key Laboratory of Resources Environmental and Green Low Carbon Processes in East Guangdong, Hanshan Normal University, Chaozhou, P. R. China.
Förderung
- National Natural Science Foundation of China
- Shenzhen Science and Technology Program
- Shenzhen Science and Technology Innovation Commission
- Construction project for 2021 full-time professional degree off-campus practice base of Shenzhen University
- Shenzhen Science and Technology Innovation Program
- Science, Technology and Innovation Commission of Shenzhen Municipality
Zitieren
APA
Dai, X., Peng, J., Liu, D., Huang, J., Huang, H., Liu, W., Lin, J., & Wang, L. (2026). Catalyst Layer Pore Design Based on Oxygen Mean Free Path for Low‐Pt HT‐PEMFCs. Small, 22(41). https://doi.org/10.1002/smll.74023
Vancouver
Dai X, Peng J, Liu D, Huang J, Huang H, Liu W, et al. Catalyst Layer Pore Design Based on Oxygen Mean Free Path for Low‐Pt HT‐PEMFCs. Small. 2026;22(41). doi:10.1002/smll.74023
BibTeX
@article{Dai2026,
author = {Dai, Xiaolin and Peng, Jinwu and Liu, Dong and Huang, Jinzhen and Huang, Hong and Liu, Wenjun and Lin, Jingjing and Wang, Lei},
title = {Catalyst Layer Pore Design Based on Oxygen Mean Free Path for Low‐Pt HT‐PEMFCs},
journal = {Small},
year = {2026},
volume = {22},
number = {41},
doi = {10.1002/smll.74023}
}
EUVIMED