EUVIMEDEUVIMED entdecken
Crossref

Oxygen Atmosphere Sintering Enhances Density and High‐Power Performance of Mn‐Doped Textured PMN‐PZT Ceramics

Mingyang Tang, Xin Liu, Wei Bai, Ming Ma, Yike Wang, Yuxin Wang, Linlang Bai, Zhuo Xu, Yongke Yan iD

Small · 2026-06 · 22 (34)

DOI: 10.1002/smll.73644 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 05.05.2026. Verfasst von Mingyang Tang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education and International Center for Dielectric Research, School of Ele…. Die Arbeit nennt 54 Literaturangaben. Gefördert von: Open Fund Project of Hanjiang National Laboratory, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High‐power applications demand piezoceramics that combine large piezoelectric strain coefficients d 33 and low mechanical loss (high Q m ). In this study, [001]‐textured Pb(Mg 1/3 Nb 2/3 )O 3 ‐PbZrO 3 ‐PbTiO 3 (PMN‐PZT) ceramics are fabricated using BaTiO 3 seeds to induce grain orientation and manganese doping for hardening. Notably, by leveraging the rapid oxygen transport mechanism within the perovskite lattice, ceramics sintered in an oxygen atmosphere achieves a high relative density of 98%–99%, significantly exceeding the 95.6% achieved in air. The dense textured ceramics exhibit excellent combined soft and hard properties, showing high d 33 of 1025 pC/N and high Q m of 810. Their performance under high drive is further evaluated via electrical transient response method. The results indicate that even at a high vibration velocity of 1.0 m/s, the dense ceramics maintained a high Q m of 560, higher than that of the less‐dense textured counterparts ( Q m = 140). Moreover, reduced strain hysteresis suggests that the dense microstructure enhances domain wall pinning, thereby mitigating mechanical losses due to inhomogeneous strain under high fields. In summary, this work demonstrates that oxygen‐atmosphere sintering effectively improves both mechanical and electrical properties in textured ceramics, showing great promise for high‐power piezoelectric applications.

Autor:innen und Institutionen

  • Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education and International Center for Dielectric Research, School of Electronic Science and Engineering, Xi'an Jiaotong University, Xi'an, P.…
  • Hanjiang National Laboratory, Wuhan, P. R. China.

ORCID-Profile: Yongke Yan

Förderung

  • Open Fund Project of Hanjiang National Laboratory
  • National Key Research and Development Program of China

Zitieren

APA

Tang, M., Liu, X., Bai, W., Ma, M., Wang, Y., Wang, Y., Bai, L., Xu, Z., & Yan, Y. (2026). Oxygen Atmosphere Sintering Enhances Density and High‐Power Performance of Mn‐Doped Textured PMN‐PZT Ceramics. Small, 22(34). https://doi.org/10.1002/smll.73644

Vancouver

Tang M, Liu X, Bai W, Ma M, Wang Y, Wang Y, et al. Oxygen Atmosphere Sintering Enhances Density and High‐Power Performance of Mn‐Doped Textured PMN‐PZT Ceramics. Small. 2026;22(34). doi:10.1002/smll.73644

BibTeX
@article{Tang2026,
  author = {Tang, Mingyang and Liu, Xin and Bai, Wei and Ma, Ming and Wang, Yike and Wang, Yuxin and Bai, Linlang and Xu, Zhuo and Yan, Yongke},
  title = {Oxygen Atmosphere Sintering Enhances Density and High‐Power Performance of Mn‐Doped Textured PMN‐PZT Ceramics},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {34},
  doi = {10.1002/smll.73644}
}
Kostenlos starten →