Printed Liquid Metal–Solid Metal Hybrid Electrodes for Stabilizing Liquid Platinum–Gallium Droplets During Electrocatalysis
Small · 2026-03 · 22 (15)
DOI: 10.1002/smll.202514950 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 19.01.2026. Verfasst von Muhammad Hamza Nazir und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Environmental Engineering, RMIT University, Melbourne, VIC, Australia. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Australian Government through the National Computational Infrastructure, Pawsey Supercomputing Research Centre under the National Computational Merit Allocation Scheme, Australian Research Council.
Abstract (Originalsprache)
Dispersing catalytically active gallium (Ga)‐based liquid metal (LM) nano‐ and micro‐droplets onto solid metallic mesh substrates remains challenging due to their strong tendency to either agglomerate or migrate away from the substrate. Another challenge is the reactivity of Ga with support metals, often forming discrete solid intermetallic phases. Here, we develop a 3D matrix formed by fused tungsten nanoparticles (W NPs) to physically entrap Ga‐based LM nano‐droplets, which effectively prevent their agglomeration and stabilize their reactive surface. Printing these W/LM composites onto a porous substrate (e.g., molybdenum (Mo) mesh) further promoted their dispersion and brought about enhanced electrochemical reactivity. To verify the efficiency of this strategy, we printed Pt‐in‐Ga droplets mixed with W NPs onto porous Mo substrate and evaluated their performance by two model reactions‐CO 2 RR (CO 2 reduction reaction) and HER (Hydrogen evolution reaction). The printed showed remarkable stability and reactivity toward both reactions. In addition, computational investigations revealed distinct active motifs for these two reactions, supporting the notion that adaptive LM catalysts can facilitate diverse reaction pathways depending on the targeted reactions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Environmental Engineering, RMIT University, Melbourne, VIC, Australia.
- Department of Biochemistry and Pharmacology, Bio21 Molecular Science and Biotechnology Institute, The University of Melbourne, Parkville, Victoria, Australia.
- School of Chemical and Biomolecular Engineering, The University of Sydney, Darlington, NSW, Australia.
- School of Science, STEM College, RMIT University, Melbourne, Victoria, Australia.
- Department of Chemical Engineering, The University of Western Australia, Perth, Western Australia, Australia.
ORCID-Profile: Torben Daeneke
Förderung
- Australian Government through the National Computational Infrastructure
- Pawsey Supercomputing Research Centre under the National Computational Merit Allocation Scheme
- Australian Research Council
Zitieren
APA
Nazir, M. H., Zahid, I., Parker, C. J., Zavabeti, A., Zuraiqi, K., Krishnamurthi, V., Meftahi, N., Kalantar-Zadeh, K., Christofferson, A. J., Chiang, K., Yang, D., & Daeneke, T. (2026). Printed Liquid Metal–Solid Metal Hybrid Electrodes for Stabilizing Liquid Platinum–Gallium Droplets During Electrocatalysis. Small, 22(15). https://doi.org/10.1002/smll.202514950
Vancouver
Nazir MH, Zahid I, Parker CJ, Zavabeti A, Zuraiqi K, Krishnamurthi V, et al. Printed Liquid Metal–Solid Metal Hybrid Electrodes for Stabilizing Liquid Platinum–Gallium Droplets During Electrocatalysis. Small. 2026;22(15). doi:10.1002/smll.202514950
BibTeX
@article{Nazir2026,
author = {Nazir, Muhammad Hamza and Zahid, Imtisal and Parker, Caiden J and Zavabeti, Ali and Zuraiqi, Karma and Krishnamurthi, Vaishnavi and Meftahi, Nastaran and Kalantar-Zadeh, Kourosh and Christofferson, Andrew J and Chiang, Ken and Yang, Dan and Daeneke, Torben},
title = {Printed Liquid Metal–Solid Metal Hybrid Electrodes for Stabilizing Liquid Platinum–Gallium Droplets During Electrocatalysis},
journal = {Small},
year = {2026},
volume = {22},
number = {15},
doi = {10.1002/smll.202514950}
}
EUVIMED