Mapping Out Fast Charging Safe Limits for High‐Loading Lithium‐Ion Cells by High‐Fidelity Operando Microscopy
Small · 2026-03 · 22 (16)
DOI: 10.1002/smll.202514619 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 23.01.2026. Verfasst von Rajeev K Gopal und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Energy Environmental and Chemical Engineering, Washington University in St. Louis, St. Louis, Missouri, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: Toyota Research Institute.
Abstract (Originalsprache)
Lithium‐ion batteries (LIBs) have become the dominating energy storage technology for electronic devices and electric cars. The demand for higher energy density and the desire for faster charging pose significant challenges to battery cycle life and safety, as lithium plating occurring during faster charging becomes dead lithium, causing irreversible capacity loss, or penetrates the porous separator to short the cell, inducing thermal runaway. To overcome these challenges, the direct and accurate detection of the onset of tiny lithium plating in realistic cell configurations is the key to success. Here, transparent micro‐LIBs fabricated in glass capillaries retain the geometry of practical cells and enable direct observation of minute lithium plating, which is otherwise challenging to detect and free from beam‐induced damage typical of electron or X‐ray techniques. Using a promising ether‐based electrolyte, our operando microscopy reveals up to a 54% improvement of the charging capacity before triggering lithium plating, which is also realized in coin cells using commercial graphite powder and electrodes. We identify a performance map that can be adopted by battery management systems to look up the safe fast‐charging capacity as a function of temperature and charging rate, avoiding lithium plating that occurs before reaching the cut‐off voltage.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Energy Environmental and Chemical Engineering, Washington University in St. Louis, St. Louis, Missouri, USA.
- Institute of Materials Science and Engineering, Washington University in St. Louis, St. Louis, Missouri, USA.
ORCID-Profile: Rajeev K Gopal, Peng Bai
Förderung
- Toyota Research Institute
Zitieren
APA
Gopal, R. K., Ma, B., & Bai, P. (2026). Mapping Out Fast Charging Safe Limits for High‐Loading Lithium‐Ion Cells by High‐Fidelity Operando Microscopy. Small, 22(16). https://doi.org/10.1002/smll.202514619
Vancouver
Gopal RK, Ma B, Bai P. Mapping Out Fast Charging Safe Limits for High‐Loading Lithium‐Ion Cells by High‐Fidelity Operando Microscopy. Small. 2026;22(16). doi:10.1002/smll.202514619
BibTeX
@article{Gopal2026,
author = {Gopal, Rajeev K and Ma, Bingyuan and Bai, Peng},
title = {Mapping Out Fast Charging Safe Limits for High‐Loading Lithium‐Ion Cells by High‐Fidelity Operando Microscopy},
journal = {Small},
year = {2026},
volume = {22},
number = {16},
doi = {10.1002/smll.202514619}
}
EUVIMED