Co‐Assembly with Donor‐Acceptor Self‐Assembled Monolayers to Enhance Interfacial Hole Extraction, Wettability, and Crystallization in Inverted Perovskite Solar Cells
Small · 2026-04 · 22 (23)
DOI: 10.1002/smll.202514211 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 18.02.2026. Verfasst von Hao-Wei Yu und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: National Science and Technology Council, Top University Project of National Taiwan University.
Abstract (Originalsprache)
Self‐assembled monolayers (SAMs) are commonly employed as hole‐selective layers in inverted perovskite solar cells. However, the widely used Me‐4PACz (Me4) often faces issues such as solution aggregation, poor precursor wettability, insufficient interfacial contact, and suboptimal crystallinity at the perovskite buried interface, leading to non‐radiative losses. This study proposes two newly designed donor‐acceptor (D‐A) SAMs, LYS‐H and its fluorinated derivative LYS‐F , and employs a co‐assembly strategy with Me4 to overcome these limitations. The D‐A structure enhances interfacial dipole moments to facilitate hole extraction, while distinct functional groups enable effective passivation at the perovskite buried interface. Additionally, the multi‐directional phenyl rings of the triphenylamine (TPA) group in LYS‐H and LYS‐F can interact with the carbazole units of Me4 via π–π stacking. This interaction helps suppress Me4 aggregation and enhances the uniformity of SAM. This approach simultaneously improves precursor wettability and promotes enhanced perovskite crystallinity. Compared to LYS‐H , fluorination of LYS‐F deepens its highest occupied molecular orbital (HOMO) and increases its effective work function, enabling better alignment with the perovskite valence band. The Me4+ LYS‐F ‐based device demonstrates superior interfacial energy level alignment and reduced interface defects, ultimately achieving a power conversion efficiency of 25.02% and a high fill factor of 83.64%. Furthermore, both unencapsulated Me4+ LYS‐H and Me4+ LYS‐F devices demonstrate substantially improved operational stability compared to the pristine Me4 device, when measured in air (RH ≈ 30%) under dark conditions at 25 °C.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan.
- Department of Chemistry, Soochow University, Taipei, Taiwan.
- Chang, Center for Sustainability and Energy Technologies, Chang Gung University, Taoyuan, Taiwan.
ORCID-Profile: Chu-Chen Chueh
Förderung
- National Science and Technology Council
- Top University Project of National Taiwan University
Zitieren
APA
Yu, H. W., Liu, Y. S., Huang, H. C., Yu, M. H., Chen, Y. H., Lin, Y. C., Chang, Y. H., Lu, S. I., Lin, Y. D., & Chueh, C. C. (2026). Co‐Assembly with Donor‐Acceptor Self‐Assembled Monolayers to Enhance Interfacial Hole Extraction, Wettability, and Crystallization in Inverted Perovskite Solar Cells. Small, 22(23). https://doi.org/10.1002/smll.202514211
Vancouver
Yu HW, Liu YS, Huang HC, Yu MH, Chen YH, Lin YC, et al. Co‐Assembly with Donor‐Acceptor Self‐Assembled Monolayers to Enhance Interfacial Hole Extraction, Wettability, and Crystallization in Inverted Perovskite Solar Cells. Small. 2026;22(23). doi:10.1002/smll.202514211
BibTeX
@article{Yu2026,
author = {Yu, Hao-Wei and Liu, Yun-Shuo and Huang, Hung-Chen and Yu, Ming-Hsuan and Chen, Yu-Hsun and Lin, Yu-Che and Chang, Ya-Ho and Lu, Shih-I and Lin, Yan-Duo and Chueh, Chu-Chen},
title = {Co‐Assembly with Donor‐Acceptor Self‐Assembled Monolayers to Enhance Interfacial Hole Extraction, Wettability, and Crystallization in Inverted Perovskite Solar Cells},
journal = {Small},
year = {2026},
volume = {22},
number = {23},
doi = {10.1002/smll.202514211}
}
EUVIMED