EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Surface‐Engineered ZnO Nanoparticles via Acetone Immersion for Charge‐Balanced High Resolution Full‐Color Organic Light Emitting Diode Displays

Changhee Lee, Hyo-Bin Kim, Ryungyu Lee, Yunjae Shin, Tae-Hyeon Kim, Jang-Kun Song, Hojin Lee iD

Small · 2026-05 · 22 (29)

DOI: 10.1002/smll.202514073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 07.04.2026. Verfasst von Changhee Lee und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Intelligent Semiconductor, Soongsil University, Seoul, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation of Korea (NRF), Korea government (MSIT), Korea Institute for Advancement of Technology (KIAT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In solution‐processed organic light‐emitting diodes (OLEDs), carrier injection imbalance and interfacial quenching persist as major hurdles, primarily due to the hole‐dominated transport in polymer‐based emitters. Here, we introduce a simple but highly effective post‐fabrication strategy for enhancing charge balance and device performance by chemically modifying ZnO nanoparticles (ZnO‐NPs) through acetone immersion. This treatment selectively passivates oxygen vacancy–related trap states at the ZnO NPs surface, resulting in improved electron injection and restored hole‐blocking behavior, without disrupting the device structure or layer interfaces. Comprehensive analyses, including X‐ray photoelectron spectroscopy (XPS), photoluminescence (PL), and transient electroluminescence (EL) measurements, confirm the defect passivation mechanism and its impact on charge injection dynamics. Acetone‐treated OLEDs exhibit reduced turn‐on voltage, significantly higher luminance (exceeding 44 000 cd/m 2 ), and enhanced efficiency across all RGB subpixels, while maintaining spectral purity. Furthermore, this method enables scalable fabrication of ultra‐high‐resolution RGB pixel arrays on a large scale without requiring additional functional layers.

Schlagwörter

Stichwörter der Autor:innen

ZnO nanoparticlescharge balancehigh resolution displayorganic light‐emitting diodesoxygen vacanciestrap passivation

Autor:innen und Institutionen

  • Department of Intelligent Semiconductor, Soongsil University, Seoul, Republic of Korea.
  • Department of Display Convergence Engineering, Sungkyunkwan University, Suwon-si, Gyeonggi-do, Republic of Korea.
  • Department of Display Engineering, Sungkyunkwan University, Suwon-si, Gyeonggi-do, Republic of Korea.

ORCID-Profile: Hojin Lee

Förderung

  • National Research Foundation of Korea (NRF)
  • Korea government (MSIT)
  • Korea Institute for Advancement of Technology (KIAT)

Zitieren

APA

Lee, C., Kim, H. B., Lee, R., Shin, Y., Kim, T. H., Song, J. K., & Lee, H. (2026). Surface‐Engineered ZnO Nanoparticles via Acetone Immersion for Charge‐Balanced High Resolution Full‐Color Organic Light Emitting Diode Displays. Small, 22(29). https://doi.org/10.1002/smll.202514073

Vancouver

Lee C, Kim HB, Lee R, Shin Y, Kim TH, Song JK, et al. Surface‐Engineered ZnO Nanoparticles via Acetone Immersion for Charge‐Balanced High Resolution Full‐Color Organic Light Emitting Diode Displays. Small. 2026;22(29). doi:10.1002/smll.202514073

BibTeX
@article{Lee2026,
  author = {Lee, Changhee and Kim, Hyo-Bin and Lee, Ryungyu and Shin, Yunjae and Kim, Tae-Hyeon and Song, Jang-Kun and Lee, Hojin},
  title = {Surface‐Engineered ZnO Nanoparticles via Acetone Immersion for Charge‐Balanced High Resolution Full‐Color Organic Light Emitting Diode Displays},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {29},
  doi = {10.1002/smll.202514073}
}
Kostenlos starten →