Electron Injection and Lattice Softening Lead to High Average ZT of n‐Type Mg 3 (Sb, Bi) 2 /Cr and Efficient Full‐Zintl Thermoelectric Module
Small · 2026-02 · 22 (8)
DOI: 10.1002/smll.202513881 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 17.12.2025. Verfasst von Jie Huang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 80 Literaturangaben. Gefördert von: European Union's Horizon 2020 research and innovation program, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Maximizing the average figure‐of‐merit ( ZT avg ) of thermoelectric (TE) materials is crucial for optimizing the module performance. Herein, this work enhances the ZT avg to 1.42 (298–673 K) in a n‐type Mg 3 (Sb, Bi) 2 ‐based material by a stepwise optimization strategy. Specifically, Cr injects electron into Mg 3 Sb 0.8 Bi 1.19 Te 0.01 , which synergistically boosts carrier concentration and forms an electron accumulation layer at the interface. Meanwhile, lattice softening and interfacial scattering suppress lattice thermal conductivity. A peak ZT of 1.72 at 673 K and ZT avg of 1.30 over 298–673 K are achieved for Mg 3 Sb 0.8 Bi 1.19 Te 0.01 –1.5 wt.% Cr. Then, through grain refinement and Se doping instead of Te, a delicate equipoise is reached between the power factor and the electronic thermal conductivity. Eventually, the Mg 3 Sb 0.8 Bi 1.19 Se 0.01 –1.5 wt.% Cr sample obtains an outstanding ZT of ≈1.9 at 573 K and ZT avg of 1.42 over 298–673 K. The integrated two‐pair full‐Zintl YbZn 2 Sb 2 /Mg 3 (Sb, Bi) 2 module achieves a high conversion efficiency of 10.5% and power density of 0.37 W cm −2 simultaneously under a temperature difference of 370 K. More importantly, this module exhibits excellent thermal stability during a 10‐day in situ test. This work provides new ideas for applications of full‐Zintl modules to the recovery of waste heat.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemistry and Chemical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China.
- Faculty of Materials Science and Engineering, Kunming University of Science and Technology, Kunming, 650093, China.
- State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University, Changchun, 130012, China.
- School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China.
ORCID-Profile: Liangwei Fu
Förderung
- European Union's Horizon 2020 research and innovation program
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Huang, J., Jin, K., Li, C., Yang, H., Zhang, Y., Wang, X., Huang, M., Ge, Z. H., & Fu, L. (2026). Electron Injection and Lattice Softening Lead to High Average ZT of n‐Type Mg 3 (Sb, Bi) 2 /Cr and Efficient Full‐Zintl Thermoelectric Module. Small, 22(8). https://doi.org/10.1002/smll.202513881
Vancouver
Huang J, Jin K, Li C, Yang H, Zhang Y, Wang X, et al. Electron Injection and Lattice Softening Lead to High Average ZT of n‐Type Mg 3 (Sb, Bi) 2 /Cr and Efficient Full‐Zintl Thermoelectric Module. Small. 2026;22(8). doi:10.1002/smll.202513881
BibTeX
@article{Huang2026,
author = {Huang, Jie and Jin, Kangpeng and Li, Chen and Yang, Hao and Zhang, Yiming and Wang, Xiyang and Huang, Ming and Ge, Zhen-Hua and Fu, Liangwei},
title = {Electron Injection and Lattice Softening Lead to High Average ZT of n‐Type Mg 3 (Sb, Bi) 2 /Cr and Efficient Full‐Zintl Thermoelectric Module},
journal = {Small},
year = {2026},
volume = {22},
number = {8},
doi = {10.1002/smll.202513881}
}
EUVIMED