Engineering Hollow Cu 2 O@CuSe Core–Shell Structure: Enhancing Zn 2+ Storage Kinetics for High‐Performance Rocking‐Chair Zinc‐Ion Batteries
Small · 2026-03 · 22 (13)
DOI: 10.1002/smll.202513765 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 12.01.2026. Verfasst von Bin Wang und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body College of Mechanical and Vehicle Engineering, Hunan University, Changsha,…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Youth Program of Shandong Natural Science Foundation.
Abstract (Originalsprache)
Aqueous zinc‐ion batteries (AZIBs) are promising energy storage systems due to their low cost, high safety, and considerable theoretical energy density. However, the use of zinc anodes could lead to dendrite growth, low Zn stripping/plating efficiency, and side reactions, hindering rate performance and cycling stability. To address these issues, a hollow Cu 2 O@CuSe core–shell structure was synthesized via a simple and eco‐friendly solution method. Benefiting from its unique core–shell structure, the material exhibits high specific capacity (430 mAh g −1 at 0.1 A g −1 ), good rate performance (248 mAh g −1 at 5.0 A g −1 ), and better cycling stability (74.4% retention after 4000 cycles at 1.0 A g −1 ). A series of tests and characterizations, including in situ electrochemical impedance spectroscopy (EIS), distribution of relaxation times (DRT) analysis and density functional theory (DFT) calculation, confirmed that the CuSe shell not only enhanced the redox activity at the electrode/electrolyte interface, but also provided structural stability for the Cu 2 O core. A rocking‐chair battery using Cu 2 O@CuSe as the anode and ZnMn 2 O 4 as the cathode achieves long‐term stable cycling (95.7% retention after 500 cycles at 0.1 A g −1 , 84% retention after 20000 cycles at 2.0 A g −1 ), demonstrating a promising strategy for high‐performance AZIBs anodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body College of Mechanical and Vehicle Engineering, Hunan University, Changsha, China.
- Henan Province Engineering Research Center of Additive Manufacturing Aeronautical Materials, Nanyang Institute of Technology, Nanyang, China.
- School of Chemistry and Chemical Engineering, Linyi University, Linyi, China.
ORCID-Profile: Ding Chen
Förderung
- Youth Program of Shandong Natural Science Foundation
Zitieren
APA
Wang, B., Wang, S., Xie, P., Huang, Y., He, Z., Li, J., Yang, C., & Chen, D. (2026). Engineering Hollow Cu 2 O@CuSe Core–Shell Structure: Enhancing Zn 2+ Storage Kinetics for High‐Performance Rocking‐Chair Zinc‐Ion Batteries. Small, 22(13). https://doi.org/10.1002/smll.202513765
Vancouver
Wang B, Wang S, Xie P, Huang Y, He Z, Li J, et al. Engineering Hollow Cu 2 O@CuSe Core–Shell Structure: Enhancing Zn 2+ Storage Kinetics for High‐Performance Rocking‐Chair Zinc‐Ion Batteries. Small. 2026;22(13). doi:10.1002/smll.202513765
BibTeX
@article{Wang2026,
author = {Wang, Bin and Wang, Siyuan and Xie, Peng and Huang, Yanming and He, Zhihao and Li, Juanyun and Yang, Chao and Chen, Ding},
title = {Engineering Hollow Cu 2 O@CuSe Core–Shell Structure: Enhancing Zn 2+ Storage Kinetics for High‐Performance Rocking‐Chair Zinc‐Ion Batteries},
journal = {Small},
year = {2026},
volume = {22},
number = {13},
doi = {10.1002/smll.202513765}
}
EUVIMED