EUVIMEDEUVIMED entdecken
Crossref

Synergistically Enhance the Mechanical and Electrochemical Properties of Fiber Batteries by Designing Aramid Fiber Skeletons

Yiqing Cheng, Yanan Zhang, Longmei Ma, Jiahe Qu, Shiqi Sun, Zhe Yang, Siwei Cao, Songlin Zhang, Chengsheng Gui, Meng Liao, Chen Zhao, Huisheng Peng und 1 weitere

Small · 2026-03 · 22 (16)

DOI: 10.1002/smll.202513724 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 20.01.2026. Verfasst von Yiqing Cheng und 12 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Materials and Devices, and Labora…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben. Gefördert von: MOST, NSFC, Ministry of Science and Technology of the People's Republic of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The practical applications of fiber lithium‐ion batteries (FLIBs) remain constrained by the insufficient mechanical robustness in terms of modulus and tensile strength due to the use of ultrathin (200 µm) metal wire skeletons, which are incompatible with textile manufacturing processes and challenging to implement in real‐world applications. Herein, we developed a mechanically reinforced FLIBs architecture employing a metal‐foil‐wrapped aramid fiber composite skeleton to address the mechanical strength issue. The rational composite skeleton achieves an exceptional modulus of 35 GPa and a tensile strength of 800 MPa, thereby effectively resolving the long‐standing modulus mismatch issue within the FLIBs during manufacturing and continuous deformation. Meanwhile, the unique wrapped architecture not only sustains 74.31% capacity retention after 300 cycles under 40 N tensile loading but also demonstrates unprecedented bending durability attributed to the stress redistribution, maintaining 92.93% capacity retention following 10 000 dynamic bending tests. Furthermore, using a lightweight AF skeleton leads to an effective increase in the active material mass fraction to 48.1%, resulting in a substantial 36% energy density boost from 109.2 to 149.2 Wh/kg. This work provides a feasible approach to addressing the synergistic relationship between the mechanical properties and electrochemical properties of fibrous electronic devices.

Schlagwörter

Stichwörter der Autor:innen

aramid fiber skeletonshigh energy densitymechanical reinforcement

Autor:innen und Institutionen

  • State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Institute of Fiber Materials and Devices, and Laboratory of Advanced Materials, Fudan University, Shanghai, China.
  • Zhejiang Shenghua Yunfeng Greeneo Co., Ltd., Huzhou, China.

ORCID-Profile: Bingjie Wang

Förderung

  • MOST
  • NSFC
  • Ministry of Science and Technology of the People's Republic of China
  • National Natural Science Foundation of China

Zitieren

APA

Cheng, Y., Zhang, Y., Ma, L., Qu, J., Sun, S., Yang, Z., Cao, S., Zhang, S., Gui, C., Liao, M., Zhao, C., Peng, H., & Wang, B. (2026). Synergistically Enhance the Mechanical and Electrochemical Properties of Fiber Batteries by Designing Aramid Fiber Skeletons. Small, 22(16). https://doi.org/10.1002/smll.202513724

Vancouver

Cheng Y, Zhang Y, Ma L, Qu J, Sun S, Yang Z, et al. Synergistically Enhance the Mechanical and Electrochemical Properties of Fiber Batteries by Designing Aramid Fiber Skeletons. Small. 2026;22(16). doi:10.1002/smll.202513724

BibTeX
@article{Cheng2026,
  author = {Cheng, Yiqing and Zhang, Yanan and Ma, Longmei and Qu, Jiahe and Sun, Shiqi and Yang, Zhe and Cao, Siwei and Zhang, Songlin and Gui, Chengsheng and Liao, Meng and Zhao, Chen and Peng, Huisheng and Wang, Bingjie},
  title = {Synergistically Enhance the Mechanical and Electrochemical Properties of Fiber Batteries by Designing Aramid Fiber Skeletons},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {16},
  doi = {10.1002/smll.202513724}
}
Kostenlos starten →