Spatially Separated Ru, Ni Sites on Extrusion 3D Printed Carbonaceous Electrodes for Enhanced Alkaline Water Splitting
Small · 2026-04 · 22 (21)
DOI: 10.1002/smll.202513391 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 17.02.2026. Verfasst von Daorui Wang und 12 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 64 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Science Foundation of China University of Petroleum, Beijing.
Abstract (Originalsprache)
Efficient electrochemical water splitting is crucial for advancing hydrogen technologies, yet reverse reactions from the close proximity of hydrogen and oxygen evolution sites often hinder performance. We present a site‐isolation strategy using extrusion‐based 3D printing that spatially separates Ru and Ni catalysts within chitosan‐derived carbon electrodes. By formulating chitosan inks with Ru‐ZIF and Ni‐Zn BTC precursors, we achieve precise filament‐level segregation, resulting in pyrolyzed electrodes with Ru clusters and Ni nanoparticles anchored on distinct layers. This design delivers outstanding bifunctional activity, reaching 87 mV for HER and 172 mV for OER at 10 mA cm −2 , along with remarkable stability for over 700 h at 0.5 A cm −2 during HER and 1.54 V at 10 mA cm −2 for overall water splitting, surpassing conventional and non‐isolated electrodes. In anion exchange membrane electrolyzers, the site‐isolated electrodes maintain robust operation for 300 h at 0.5 A cm −2 . Theoretical calculations and XAFS analysis reveal that spatially separated Ru and Ni sites exhibit localized electronic structures, which effectively lower the d‐band center, enhancing hydrogen and oxygen desorption, and suppressing reverse reactions. This scalable 3D printing approach enables advanced electrocatalytic performance through device‐level spatial control.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing, China.
- College of New Energy and Materials, China University of Petroleum, Beijing, China.
- School of Environment, Key Laboratory of Yellow River and Huai River Water Environment and Pollution Control, Henan Normal University, Ministry of Education, Xinxiang, Henan, China.
- X-ray Science Division, Argonne National Laboratory, Lemont, Illinois, USA.
ORCID-Profile: Ying Yang
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Science Foundation of China University of Petroleum, Beijing
- Office of Science by Argonne National Laboratory
- US DOE
- U.S. Department of Energy
Zitieren
APA
Wang, D., Su, R., Han, C., Cui, C., Wang, R., Xiong, L., Zhang, H., Xiao, P., Chen, G., Hao, S., Zhi, S., Lee, S., & Yang, Y. (2026). Spatially Separated Ru, Ni Sites on Extrusion 3D Printed Carbonaceous Electrodes for Enhanced Alkaline Water Splitting. Small, 22(21). https://doi.org/10.1002/smll.202513391
Vancouver
Wang D, Su R, Han C, Cui C, Wang R, Xiong L, et al. Spatially Separated Ru, Ni Sites on Extrusion 3D Printed Carbonaceous Electrodes for Enhanced Alkaline Water Splitting. Small. 2026;22(21). doi:10.1002/smll.202513391
BibTeX
@article{Wang2026,
author = {Wang, Daorui and Su, Rui and Han, Chengjun and Cui, Chenmeng and Wang, Ruiying and Xiong, Longlong and Zhang, Haonan and Xiao, Peng and Chen, Guangjin and Hao, Shijie and Zhi, Songsong and Lee, Sungsik and Yang, Ying},
title = {Spatially Separated Ru, Ni Sites on Extrusion 3D Printed Carbonaceous Electrodes for Enhanced Alkaline Water Splitting},
journal = {Small},
year = {2026},
volume = {22},
number = {21},
doi = {10.1002/smll.202513391}
}
EUVIMED