Laser‐Assisted In Situ Fabrication of rGO/Bi 2 O 3 Nanocomposites for Heavy Metal Sensing
Small · 18.04.2026
DOI: 10.1002/smll.202513335 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 18.04.2026. Verfasst von Andy Bruno und 6 weiteren Autor:innen. Beteiligte Einrichtung: Universitat Autonoma de Barcelona (UAB), Barcelona, Spain. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon Europe research and innovation program, Severo Ochoa Centres of Excellence programme, ERDF/ESF project TECHSCALE.
Abstract (Originalsprache)
In this work, we introduce a laser‐assisted approach to synthesize reduced graphene oxide/bismuth oxide (III) (rGO/Bi 2 O 3 ) nanocomposites through a single‐step CO 2 laser photothermal process. While rGO/Bi 2 O 3 composites have been previously reported, to the best of our knowledge, this work represents the first demonstration of their formation via a single‐step CO 2 laser‐assisted photothermal process, enabling direct integration into flexible electrodes. This method simultaneously reduces graphene oxide to conductive rGO and decomposes bismuth nitrate into Bi 2 O 3 nanoplatelets, which self‐assemble homogeneously within the carbon matrix. The resulting hybrid exhibits an interconnected architecture that promotes electron transport and provides abundant active sites for metal ion adsorption and redox activity. Morphological and spectroscopic analyses confirm the uniform integration of Bi 2 O 3 within the rGO network, while electrochemical measurements reveal excellent stripping voltammetric performance toward Pb(II), Cd(II), and Cu(II), characterized by linear responses with high correlation coefficients and estimated detection limits of 5.3 ppb for Pb(II), 11.6 ppb for Cd(II), and 1.6 ppb for Cu(II). Beyond its analytical sensitivity, the simplicity and reproducibility of this fabrication strategy demonstrate a path toward large‐scale, low‐cost, and environmentally friendly sensor production. This work establishes laser‐engineered rGO/Bi 2 O 3 electrodes as promising platforms for on‐site water quality monitoring and next‐generation portable electrochemical devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Universitat Autonoma de Barcelona (UAB), Barcelona, Spain.
- Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and BIST, Barcelona, Spain.
- Department of Chemistry, Faculty of Natural Science, University of Tirana, Tirana, Albania.
- Regional Centre of Advanced Technologies and Materials (RCPTM), Czech Advanced Technology and Research Institute (CATRIN), Palacký University Olomouc, Olomouc, Czech Republic.
- Nano-Alb Academy of Sciences of Albania, Tirana, Albania.
- IT4Innovations, VŠB - Technical University of Ostrava, Ostrava-Poruba, Czech Republic.
ORCID-Profile: Arben Merkoçi
Förderung
- European Union's Horizon Europe research and innovation program
- Severo Ochoa Centres of Excellence programme
- ERDF/ESF project TECHSCALE
- REFRESH-Research Excellence for REgion Sustainability and High-tech Industries
Zitieren
APA
Bruno, A., Ameda, A., Dědek, I., Vasjari, M., Otyepka, M., Alvarez-Diduk, R., & Merkoçi, A. (2026). Laser‐Assisted In Situ Fabrication of rGO/Bi 2 O 3 Nanocomposites for Heavy Metal Sensing. Small. https://doi.org/10.1002/smll.202513335
Vancouver
Bruno A, Ameda A, Dědek I, Vasjari M, Otyepka M, Alvarez-Diduk R, et al. Laser‐Assisted In Situ Fabrication of rGO/Bi 2 O 3 Nanocomposites for Heavy Metal Sensing. Small. 2026. doi:10.1002/smll.202513335
BibTeX
@article{Bruno2026,
author = {Bruno, Andy and Ameda, Ana and Dědek, Ivan and Vasjari, Majlinda and Otyepka, Michal and Alvarez-Diduk, Ruslán and Merkoçi, Arben},
title = {Laser‐Assisted In Situ Fabrication of rGO/Bi 2 O 3 Nanocomposites for Heavy Metal Sensing},
journal = {Small},
year = {2026},
doi = {10.1002/smll.202513335}
}
EUVIMED