EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

In Situ Crosslinked Diallylammonium‐Functionalized Poly(Biphenyl Alkylene) for High‐Performance Anion Exchange Membranes

Jiyoon Jung, Young Sang Park, Mo Beom Koo, Jinsuk Ku, Cheol-Hee Ahn, Seung Sang Hwang, Hoon Taek Chung, Albert S Lee iD

Small · 2026-01 · 22 (5)

DOI: 10.1002/smll.202511358 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 17.12.2025. Verfasst von Jiyoon Jung und 7 weiteren Autor:innen. Beteiligte Einrichtung: Materials Architecturing Research Center, Korea Institute of Science and Technology, Seong Buk Gu, Hwarangno 14 gil-5, Seoul, 02792, Republic of Kore…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Science and ICT, South Korea, Korea government (MSIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The intrinsic trade‐off between ion conductivity and mechanical integrity in high‐ion exchange capacity (IEC) anion exchange membranes (AEMs) has remained a major challenge for the practical implementation of anion exchange membrane water electrolyzer (AEMWE) technology. Here, crosslinked AEMs (BP‐ cross ‐PDAA) is developed via free‐radical cyclopolymerization of diallylammonium‐functionalized poly(biphenyl alkylene), where the IEC ( n ) is precisely tuned from 2.32 meq g −1 to 3.39 meq g −1 by adjusting the content of diallyldimethylammonium comonomer. BP‐ cross ‐PDAA membranes exhibited excellent hydration characteristics, including hydroxide conductivity (up to 152.4 mS cm −1 at 80 °C), swelling ratio (24.2%), and alkaline stability (98.7% retention over 350 h), attributed to their robust crosslinked network structure without sacrificing their high IEC. Furthermore, membrane‐electrode assembly (MEA‐ n ) tests demonstrated remarkable AEMWE performance, with MEA‐3.39 achieving a peak current density of 12.39 A cm −2 at 2.0 V using a non‐platinum group metal anode, and 6.1 A cm −2 under pure water condition. MEA‐3.39 also exhibited excellent durability, with a minimal voltage degradation rate of 1.2 µV h −1 over 1,000 h at 1 A cm −2 in 1 M KOH at 50 °C.

Schlagwörter

Stichwörter der Autor:innen

anion exchange membrane water electrolyzercrosslinked anion exchange membranefree‐radical cyclopolymerization

Autor:innen und Institutionen

  • Materials Architecturing Research Center, Korea Institute of Science and Technology, Seong Buk Gu, Hwarangno 14 gil-5, Seoul, 02792, Republic of Korea.
  • Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University, Gwanak-ro 1, Gwanak-gu, Seoul, 08826, Republic of Korea.
  • Convergence Research Center for Solutions to Electromagnetic Interference in Future-mobility, Korea Institute of Science and Technology, Hwarang-ro 14-gil 5, Seongbuk-gu, Seoul, 02792, Republic of Korea.
  • Department of Chemistry, Sejong University (SJU), Seoul, 05006, Republic of Korea.

ORCID-Profile: Albert S Lee

Förderung

  • National Research Foundation of Korea
  • Ministry of Science and ICT, South Korea
  • Korea government (MSIT)
  • Korea Institute of Science and Technology

Zitieren

APA

Jung, J., Park, Y. S., Koo, M. B., Ku, J., Ahn, C. H., Hwang, S. S., Chung, H. T., & Lee, A. S. (2026). In Situ Crosslinked Diallylammonium‐Functionalized Poly(Biphenyl Alkylene) for High‐Performance Anion Exchange Membranes. Small, 22(5). https://doi.org/10.1002/smll.202511358

Vancouver

Jung J, Park YS, Koo MB, Ku J, Ahn CH, Hwang SS, et al. In Situ Crosslinked Diallylammonium‐Functionalized Poly(Biphenyl Alkylene) for High‐Performance Anion Exchange Membranes. Small. 2026;22(5). doi:10.1002/smll.202511358

BibTeX
@article{Jung2026,
  author = {Jung, Jiyoon and Park, Young Sang and Koo, Mo Beom and Ku, Jinsuk and Ahn, Cheol-Hee and Hwang, Seung Sang and Chung, Hoon Taek and Lee, Albert S},
  title = {In Situ Crosslinked Diallylammonium‐Functionalized Poly(Biphenyl Alkylene) for High‐Performance Anion Exchange Membranes},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {5},
  doi = {10.1002/smll.202511358}
}
Kostenlos starten →