Heterogeneous Interface Engineering with In‐Situ Aligned Polyamide Fibrils for High‐Energy‐Density Polypropylene Dielectric Films
Small · 2026-02 · 22 (11)
DOI: 10.1002/smll.202511182 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 31.12.2025. Verfasst von Mei-Yue Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Polymer Science and Engineering, State Key Laboratory of Advanced Polymer Materials, Sichuan University, Chengdu, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 65 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The inherently low dielectric constant constrains the discharged energy density of polypropylene (PP)‐based dielectrics, making it challenging to meet the growing demand for lightweight, efficient, and cost‐effective dielectric capacitors. In this work, highly aligned polyamide 6 (PA6) submicron fibrils were in situ fabricated in the PP matrix via the “melt blending‐hot stretching‐quenching‐annealing” technique, where the PA6 submicron fibrils could effectively serve as the heterogeneous nucleation sites for promoting the formation of PP crystals. As a result, the well‐defined PA6 submicron fibrils and PP crystalline structure not only provided extensive interfacial areas to increase the interfacial polarization, but also significantly increased the propagation path of electric trees to improve the breakdown strength. The PP/PA6 dielectric films exhibited a remarkable maximum discharged energy density of 5.8 J cm − 3 with a high energy efficiency of 88.9% at 700 MV m −1 . This work demonstrates that heterogeneous interface engineering provides a viable route to simultaneously achieve high energy density and high efficiency in PP‐based dielectric films, thereby promoting the scalable fabrication of high‐performance all‐organic dielectric capacitors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Polymer Science and Engineering, State Key Laboratory of Advanced Polymer Materials, Sichuan University, Chengdu, China.
- Institute of Cardiovascular Surgery, West China Hospital, Sichuan University, Chengdu, China.
ORCID-Profile: Hua-Dong Huang
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Chen, M. Y., Li, D. L., Yu, J., Lan, K. Y., Zhong, G. J., Huang, H. D., & Li, Z. M. (2026). Heterogeneous Interface Engineering with In‐Situ Aligned Polyamide Fibrils for High‐Energy‐Density Polypropylene Dielectric Films. Small, 22(11). https://doi.org/10.1002/smll.202511182
Vancouver
Chen MY, Li DL, Yu J, Lan KY, Zhong GJ, Huang HD, et al. Heterogeneous Interface Engineering with In‐Situ Aligned Polyamide Fibrils for High‐Energy‐Density Polypropylene Dielectric Films. Small. 2026;22(11). doi:10.1002/smll.202511182
BibTeX
@article{Chen2026,
author = {Chen, Mei-Yue and Li, De-Long and Yu, Jin and Lan, Ke-Yu and Zhong, Gan-Ji and Huang, Hua-Dong and Li, Zhong-Ming},
title = {Heterogeneous Interface Engineering with In‐Situ Aligned Polyamide Fibrils for High‐Energy‐Density Polypropylene Dielectric Films},
journal = {Small},
year = {2026},
volume = {22},
number = {11},
doi = {10.1002/smll.202511182}
}
EUVIMED