Resilience‐Enhancing Additive Design Enabled by Macrocyclic Additive‐Mediated Failure Suppression in Lithium‐Ion Batteries
Small · 2025-12 · 21 (48)
DOI: 10.1002/smll.202509405 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 07.10.2025. Verfasst von Chi-Yeong Hong und 10 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Batteries Research Center, Korea Electronics Technology Institute, 25, Saenari-ro, Seongnam, 13509, Republic of Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Institute of Information & Communications Technology Planning & Evaluation, National Research Foundation of Korea.
Abstract (Originalsprache)
The high‐voltage operation of mid‐nickel NCM Li‐ion batteries (LIBs) increases the energy density but accelerates cell degradation owing to transition‐metal dissolution and oxygen‐radical formation. In this study, the macrocyclic additive 1,4,7,10,13‐pentaazacyclopentadecane is introduced, which enhances cell resilience through a dual‐protection mechanism. The additive spontaneously chelates the dissolved Mn ions, suppressing their migration and subsequent contamination at the negative electrode. Additionally, the Mn‐captured additive deactivates the oxygen radicals generated under high‐voltage conditions, mitigating gas evolution and electrolyte decomposition. This sequencing–scavenging mechanism prevents active Li consumption, stabilizes interfacial layers, and reduces impedance growth. As a result, the cells incorporating the additive exhibit significantly improved cycling stability, reduced capacity fading, and suppressed gas evolution, even under harsh operating conditions. This study demonstrates a new additive design strategy that overcomes the limitations of conventional film‐forming additives and provides an effective approach for enhancing the long‐term durability and performance of high‐energy LIBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Advanced Batteries Research Center, Korea Electronics Technology Institute, 25, Saenari-ro, Seongnam, 13509, Republic of Korea.
- Department of Energy Science, Sungkyunkwan University, Suwon, 16419, Republic of Korea.
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology, Ulsan, 44919, Republic of Korea.
- Analysis and Assessment Research Group, Research Institute of Industrial Science and Technology, Cheongam‑Ro 67, Pohang, 37673, Republic of Korea.
- Department of Energy, Sungkyunkwan University, Suwon, 16419, Republic of Korea.
ORCID-Profile: Hyun-Seung Kim
Förderung
- Institute of Information & Communications Technology Planning & Evaluation
- National Research Foundation of Korea
Zitieren
APA
Hong, C. Y., Lee, J., Hwang, C., Chang, J. H., Park, J., Kim, W., Lee, C. R., Song, J. H., Song, H. K., Kim, K. J., & Kim, H. S. (2025). Resilience‐Enhancing Additive Design Enabled by Macrocyclic Additive‐Mediated Failure Suppression in Lithium‐Ion Batteries. Small, 21(48). https://doi.org/10.1002/smll.202509405
Vancouver
Hong CY, Lee J, Hwang C, Chang JH, Park J, Kim W, et al. Resilience‐Enhancing Additive Design Enabled by Macrocyclic Additive‐Mediated Failure Suppression in Lithium‐Ion Batteries. Small. 2025;21(48). doi:10.1002/smll.202509405
BibTeX
@article{Hong2025,
author = {Hong, Chi-Yeong and Lee, Jeongin and Hwang, Chihyun and Chang, Joon Ha and Park, Jungjae and Kim, Wontak and Lee, Chae Rim and Song, Jun Ho and Song, Hyun-Kon and Kim, Ki Jae and Kim, Hyun-Seung},
title = {Resilience‐Enhancing Additive Design Enabled by Macrocyclic Additive‐Mediated Failure Suppression in Lithium‐Ion Batteries},
journal = {Small},
year = {2025},
volume = {21},
number = {48},
doi = {10.1002/smll.202509405}
}
EUVIMED