Ultralight, Elasto‐Flexible, and High‐Temperature Resistant Ceramic Nanofiber Sponges for Thermal Superinsulation
Small · 2026-01 · 22 (4)
DOI: 10.1002/smll.202509204 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 30.10.2025. Verfasst von Lei Wen und 10 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin, 150080, Chi…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 67 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Open Funding of the National Key Laboratory of Aerospace Flight Technology, Natural Science Foundation of Heilongjiang Province.
Abstract (Originalsprache)
Advanced ceramic sponge materials that combine sufficient elasticity with splendid high‐temperature resistance are urgently needed as thermal insulators in harsh environments. However, the development of ceramics in ultralight and elastic material systems is severely constrained by their brittleness and defect sensitivity. Here, this study reports an elasto‐flexible, heat‐resisting, and lamellar‐structured ceramic sponge based on yttria‐stabilized ZrO 2 (YSZ) nanofibers through a scalable solution blow spinning process. The YSZ nanofibers exhibit small grain sizes (≈50 nm at 1300 °C), providing crucial support for the mechanical and thermal properties. The porous 3D sponges formed by in situ deposition of YSZ nanofibers possess ultralight density (≥ 5 mg cm −3 ), 80% reversible compressive strains, high fatigue resistance (less than 1.59% permanent degradation after 1000 cycles at 50% strain), and can fully recover from large deformations with near‐zero Poisson's ratios. In addition, the YSZ nanofiber sponges exhibit temperature‐invariant superelasticity range from −196 to 1300 °C, exceptional bendability, low thermal expansion coefficient (9.26 × 10 −6 °C −1 at 1300 °C), and excellent thermal insulation with a thermal conductivity as low as 0.028 W m −1 K −1 . Such rarely integrated properties sharply contrast with those of polymer/carbon materials and traditional ceramic aerogels, making ceramic sponges ideal for many high‐end applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin, 150080, China.
- School of Astronautics, Harbin Institute of Technology, Harbin, 150001, China.
- National Key Laboratory of Aerospace Flight Technology, Beijing Institute of Aerospace Technology, Beijing, 100074, China.
ORCID-Profile: Chao Sui
Förderung
- National Natural Science Foundation of China
- Open Funding of the National Key Laboratory of Aerospace Flight Technology
- Natural Science Foundation of Heilongjiang Province
- Fundamental Research Funds for the Central Universities
- National Key Laboratory of Science and Technology on Advanced Composites in Special Environments
Zitieren
APA
Wen, L., Zhou, Y., Zhao, Y., Zang, Z., Zhao, C., Li, J., Sun, S., Ding, R., Wang, C., He, X., & Sui, C. (2026). Ultralight, Elasto‐Flexible, and High‐Temperature Resistant Ceramic Nanofiber Sponges for Thermal Superinsulation. Small, 22(4). https://doi.org/10.1002/smll.202509204
Vancouver
Wen L, Zhou Y, Zhao Y, Zang Z, Zhao C, Li J, et al. Ultralight, Elasto‐Flexible, and High‐Temperature Resistant Ceramic Nanofiber Sponges for Thermal Superinsulation. Small. 2026;22(4). doi:10.1002/smll.202509204
BibTeX
@article{Wen2026,
author = {Wen, Lei and Zhou, Yingchun and Zhao, Yushun and Zang, Zifu and Zhao, Chenxi and Li, Junjiao and Sun, Shaodong and Ding, Renjie and Wang, Chao and He, Xiaodong and Sui, Chao},
title = {Ultralight, Elasto‐Flexible, and High‐Temperature Resistant Ceramic Nanofiber Sponges for Thermal Superinsulation},
journal = {Small},
year = {2026},
volume = {22},
number = {4},
doi = {10.1002/smll.202509204}
}
EUVIMED