EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Revealing Cycling‐Induced Evolution of Intact Sodium Metal Battery Interfaces Using Cryo‐Focused Ion Beam Cross‐Sectioning and Electron Microscopy

Kevin C Matthews, Rinish R Vaidyula, Charles B Mullins, Jamie H Warner iD

Small · 2026-02 · 22 (7)

DOI: 10.1002/smll.202508531 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 15.12.2025. Verfasst von Kevin C Matthews und 3 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science and Engineering Program and Texas Materials Institute, The University of Texas at Austin, 204 East Dean Keeton Street, Austin, TX, …. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Batteries consist of complex, layered interfaces, and their performance‐limiting mechanisms are best understood through nanoscale structural analysis of both anodes and cathodes in realistic full‐cell architectures. This has been challenging for liquid‐electrolyte‐based batteries due to limitations imposed by handling liquid electrolytes and size constraints in most high‐resolution electron microscopes, while cryogenic focused ion beam (cryo‐FIB) milling has typically been limited to a single electrode. Here, a full‐cell cryo‐FIB milling process is presented that reveals anode, cathode, and seprator interfaces in a liquid electrolyte cell with a sodium metal anode and Na 0.44 MnO 2 cathode. This full‐cell cryo‐milled battery stack enables visualization of interfaces at both electrodes, allowing characterization of the entire cell while comparing the effects of two solvents, ethlyene carbonat/diethyl carbonate and digylme, in a NaPF 6 salt‐based electrolyte. It is demonstrated that after moderate cycling (10–50 cycles), degradation pathways differ between carbonate‐ and ether‐based electrolytes. Carbonate‐based cells degrade rapidly, driven largely by electrolyte depletion resulting from excessive solid electrolyte interphase (SEI) formation at the anode. In contrast, diglyme‐based exhibit improved cycling stability but ultimately also experience electrolyte depletion, which instead arises from electrolyte degradation at the cathode. These findings provide insight into solvent‐specific degradation mechanisms relevant to future battery development.

Schlagwörter

Stichwörter der Autor:innen

batteriescryo‐FIBelectron microscopymaterials characterization

Autor:innen und Institutionen

  • Materials Science and Engineering Program and Texas Materials Institute, The University of Texas at Austin, 204 East Dean Keeton Street, Austin, TX, 78712, USA.
  • Department of Chemistry, The University of Texas at Austin, Austin, TX, 78712, USA.
  • John J. McKetta Department of Chemical Engineering, The University of Texas at Austin, Austin, TX, 78712, USA.
  • Walker Department of Mechanical Engineering, The University of Texas at Austin, 204 East Dean Keeton Street, Austin, TX, 78712, USA.

ORCID-Profile: Jamie H Warner

Zitieren

APA

Matthews, K. C., Vaidyula, R. R., Mullins, C. B., & Warner, J. H. (2026). Revealing Cycling‐Induced Evolution of Intact Sodium Metal Battery Interfaces Using Cryo‐Focused Ion Beam Cross‐Sectioning and Electron Microscopy. Small, 22(7). https://doi.org/10.1002/smll.202508531

Vancouver

Matthews KC, Vaidyula RR, Mullins CB, Warner JH. Revealing Cycling‐Induced Evolution of Intact Sodium Metal Battery Interfaces Using Cryo‐Focused Ion Beam Cross‐Sectioning and Electron Microscopy. Small. 2026;22(7). doi:10.1002/smll.202508531

BibTeX
@article{Matthews2026,
  author = {Matthews, Kevin C and Vaidyula, Rinish R and Mullins, Charles B and Warner, Jamie H},
  title = {Revealing Cycling‐Induced Evolution of Intact Sodium Metal Battery Interfaces Using Cryo‐Focused Ion Beam Cross‐Sectioning and Electron Microscopy},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {7},
  doi = {10.1002/smll.202508531}
}
Kostenlos starten →