EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Butterfly Wing Microstructure Inspired Solid/Porous Alternating Layered Structures: In Situ Visualization of Confined Foaming

Jianxiang Zhao iD, Lei Zhang, Jun Uk Lee, Nello D Sansone, Janet Kim, Leen Bazbaz, Abdullah Al Faysal, Patrick C Lee iD

Small · 2025-10 · 21 (40)

DOI: 10.1002/smll.202508472 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 24.08.2025. Verfasst von Jianxiang Zhao und 7 weiteren Autor:innen. Beteiligte Einrichtung: Multifunctional Composite Manufacturing Laboratory (MCML), Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, M5S 3…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores confined foaming in micro‐/nano‐layered (MNL) solid/porous alternating structures inspired by the hierarchical architecture of Ulysses butterfly wings. Biomimetic MNL films composed of alternating polycarbonate (PC) and polymethyl methacrylate (PMMA) layers (17–513 layers) are fabricated via advanced coextrusion and foaming techniques. In situ visualization reveals confinement effects dependent on layer thickness; while nucleation primarily occurrs at PC/PMMA interfaces due to reduced energy barriers, a strong confinement zone within 10 µm of the interfaces significantly restricts cell growth, most notably in the 129‐layer and 513‐layer samples, where single‐cell rows are observed. Thermal regulation tests show that the 513‐layer bio‐mimic structure reduces temperature rise by 80%, 65%, and 50% compared to polyethylene (PE) film, a three‐layer sandwich structure, and butterfly wings, respectively. It also exhibits exceptional delay in heat accumulation under radiative conditions, with a time to reach half of the maximum temperature rise of 165 s, compared to 20 s (PE) and 40 s (both three‐layer and butterfly wing). The bio‐mimic architecture also exhibits strong anisotropic thermal conductivity, effectively suppressing through‐thickness heat transfer while enhancing lateral dissipation. These results connect nature‐inspired design and practical implementation, highlighting the potential of bio‐mimic MNL structures for advanced thermal management applications.

Schlagwörter

Stichwörter der Autor:innen

bio‐mimic materialsfoaming dynamicshierarchical compositesmicro‐/nano‐layered (MNL) structuresthermal regulation

Autor:innen und Institutionen

  • Multifunctional Composite Manufacturing Laboratory (MCML), Department of Mechanical and Industrial Engineering, University of Toronto, Toronto, M5S 3G8, Canada.

ORCID-Profile: Jianxiang Zhao, Patrick C Lee

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Zhao, J., Zhang, L., Lee, J. U., Sansone, N. D., Kim, J., Bazbaz, L., Faysal, A. A., & Lee, P. C. (2025). Butterfly Wing Microstructure Inspired Solid/Porous Alternating Layered Structures: In Situ Visualization of Confined Foaming. Small, 21(40). https://doi.org/10.1002/smll.202508472

Vancouver

Zhao J, Zhang L, Lee JU, Sansone ND, Kim J, Bazbaz L, et al. Butterfly Wing Microstructure Inspired Solid/Porous Alternating Layered Structures: In Situ Visualization of Confined Foaming. Small. 2025;21(40). doi:10.1002/smll.202508472

BibTeX
@article{Zhao2025,
  author = {Zhao, Jianxiang and Zhang, Lei and Lee, Jun Uk and Sansone, Nello D and Kim, Janet and Bazbaz, Leen and Faysal, Abdullah Al and Lee, Patrick C},
  title = {Butterfly Wing Microstructure Inspired Solid/Porous Alternating Layered Structures: In Situ Visualization of Confined Foaming},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {40},
  doi = {10.1002/smll.202508472}
}
Kostenlos starten →