3D Printing of Bicontinuous Nanoparticle‐Stabilized Emulsion Gels via Co‐Solvent Removal
Small · 2025-12 · 21 (51)
DOI: 10.1002/smll.202504718 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 03.11.2025. Verfasst von Philip R Iaccarino und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, University of Pennsylvania, 220 South 33rd St., Philadelphia, PA, 19104-6315, USA. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Penn MRSEC, Penn Soft AE, Air Force Office of Scientific Research.
Abstract (Originalsprache)
Bicontinuous emulsion gels are mixtures with interpenetrating arrangements of two immiscible liquids stabilized with particles. The structures of such gels are readily made into simple macroscale geometries, like sheets and fibers; however, achieving more complex macroscopic structures while maintaining control over microscopic features and morphological bicontinuity remains a challenge. In this study, the ability to fabricate complex 3D structures of bicontinuous emulsion gels using direct ink writing (DIW) is demonstrated. The emulsion precursors are formulated with a mixture of hydrophilic and hydrophobic fumed silica particles; these precursors exhibit shear‐thinning and yield stress behavior necessary for DIW. The thixotropic nature of the precursor further promotes the formation of bicontinuous emulsion gels through vaporization‐induced phase separation and stabilization through both interfacial jamming and bulk stabilization mechanisms. This fabrication technique enables the creation of functional bicontinuous structures with complex architectures, paving the way for application in biomedical implants, catalytic reactors, and beyond.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Biomolecular Engineering, University of Pennsylvania, 220 South 33rd St., Philadelphia, PA, 19104-6315, USA.
- Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut St., Philadelphia, PA, 19104-6272, USA.
- Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, 220 South 33rd St., Philadelphia, PA, 19104-6315, USA.
ORCID-Profile: Daeyeon Lee
Förderung
- Penn MRSEC
- Penn Soft AE
- Air Force Office of Scientific Research
Zitieren
APA
Iaccarino, P. R., Lawal, D., Raney, J. R., Stebe, K. J., & Lee, D. (2025). 3D Printing of Bicontinuous Nanoparticle‐Stabilized Emulsion Gels via Co‐Solvent Removal. Small, 21(51). https://doi.org/10.1002/smll.202504718
Vancouver
Iaccarino PR, Lawal D, Raney JR, Stebe KJ, Lee D. 3D Printing of Bicontinuous Nanoparticle‐Stabilized Emulsion Gels via Co‐Solvent Removal. Small. 2025;21(51). doi:10.1002/smll.202504718
BibTeX
@article{Iaccarino2025,
author = {Iaccarino, Philip R and Lawal, Damilola and Raney, Jordan R and Stebe, Kathleen J and Lee, Daeyeon},
title = {3D Printing of Bicontinuous Nanoparticle‐Stabilized Emulsion Gels via Co‐Solvent Removal},
journal = {Small},
year = {2025},
volume = {21},
number = {51},
doi = {10.1002/smll.202504718}
}
EUVIMED