EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Aerosol Printing of 3D Conductive Microstructures via Precision Dot Modulation

Md Abu Mosa, Jeong Yeop Jo, Sang-Hyeon Park, Kye-Si Kwon iD

Small · 2025-08 · 21 (31)

DOI: 10.1002/smll.202504037 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 05.06.2025. Verfasst von Md Abu Mosa und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic Materials, Devices and Equipment Engineering, Soonchunhyang University, 22, Soonchunhyang-ro, Asan, Chungnam, 31538, South K…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Korea government, Korea Evaluation Institute of Industrial Technology, Soonchunhyang University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The advancement of electronic devices necessitates the fabrication of high‐precision, 3D conductive microstructures using functional materials. This study introduces an improved pneumatic shuttering method for aerosol printing (AP), enabling the fabrication of 3D microstructures. The approach overcomes the limitations of conventional AP techniques, which struggle to print dot‐based structures essential for constructing intricate 3D geometries layer by layer. To address this challenge, a pneumatic shuttering mechanism based on flow‐path control is developed, enabling rapid on–off jet for both line and dot printing. This technique allows precise dot modulation (ranging from 20 to 144 µm), facilitating high‐resolution and scalable patterning. Leveraging this capability, an analog halftoning technique is implemented, enabling precise control of the deposition of functional materials. Additionally, the method supports the fabrication of complex 3D microstructures, including conductive pillars with customizable angles relative to the substrate. These pillars serve as interconnects for chips with uneven surfaces, effectively addressing challenges associated with large height variations. This advancement in AP technology significantly enhances deposition precision and patterning flexibility, broadening its potential for advanced material applications in next‐generation electronics and additive manufacturing.

Schlagwörter

Stichwörter der Autor:innen

3D microstructuresadditive manufacturingaerosol printingdot‐based printinghigh‐resolution depositionpneumatic shuttering

Autor:innen und Institutionen

  • Department of Electronic Materials, Devices and Equipment Engineering, Soonchunhyang University, 22, Soonchunhyang-ro, Asan, Chungnam, 31538, South Korea.
  • Department of Mechanical Engineering, Soonchunhyang University, 22, Soonchunhyang-ro, Asan, Chungnam, 31538, South Korea.

ORCID-Profile: Kye-Si Kwon

Förderung

  • Korea government
  • Korea Evaluation Institute of Industrial Technology
  • Soonchunhyang University

Zitieren

APA

Mosa, M. A., Jo, J. Y., Park, S. H., & Kwon, K. S. (2025). Aerosol Printing of 3D Conductive Microstructures via Precision Dot Modulation. Small, 21(31). https://doi.org/10.1002/smll.202504037

Vancouver

Mosa MA, Jo JY, Park SH, Kwon KS. Aerosol Printing of 3D Conductive Microstructures via Precision Dot Modulation. Small. 2025;21(31). doi:10.1002/smll.202504037

BibTeX
@article{Mosa2025,
  author = {Mosa, Md Abu and Jo, Jeong Yeop and Park, Sang-Hyeon and Kwon, Kye-Si},
  title = {Aerosol Printing of 3D Conductive Microstructures via Precision Dot Modulation},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {31},
  doi = {10.1002/smll.202504037}
}
Kostenlos starten →