EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

3D Printing of Deformable Multicolor Alternating‐Current Electroluminescent Devices Through Rational Design of Functional Inks

Jeongbin Park, Shakti Singh, Jinhwan Yoon iD

Small · 2025-08 · 21 (31)

DOI: 10.1002/smll.202502435 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 12.06.2025. Verfasst von Jeongbin Park und 2 weiteren Autor:innen. Beteiligte Einrichtung: Graduate Department of Chemical Materials, Institute for Plastic Information and Energy Materials, Sustainable Utilization of Photovoltaic Energy Res…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministry of Science and ICT, National Research Foundation of Korea through the Mid-Career Research Program, Engineering Research Center Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of flexible and customizable electroluminescent devices represents a significant challenge in advanced manufacturing. This paper introduces a novel approach for fabricating highly deformable, fully 3D‐printed alternating‐current electroluminescent devices through the rational design of UV‐curable functional inks. The devices feature a unique multilayer structure including a UV‐curable thiol‐ene crosslinked emission layer (ZBS‐t‐SE) and temperature‐responsive ionic hydrogel electrodes (FFP). The ZBS‐t‐SE demonstrates exceptional mechanical properties, with a strain of 259% at 727 kPa, whereas the FFP electrodes exhibit excellent printability through controlled micelle formation, high ionic conductivity (2.5 × 10⁻ 2 S cm −1 ), and stable performance under repeated deformation (>3000 cycles at 200% strain). The optimized devices maintain stable operation under various deformation modes, including stretching, bending, and twisting, achieving a maximum luminance of 267.4 cd m − 2 at 200% strain. Furthermore, the 3D printing approach enables the fabrication of complex 3D structures with multi‐color emission through precise spatial control of functional materials, presenting a transformative strategy for next‐generation flexible electronics and display technologies.

Schlagwörter

Stichwörter der Autor:innen

3D printingalternating‐current electroluminescent devicesionic hydrogelsstretchable electronicsthiol‐ene click chemistry

Autor:innen und Institutionen

  • Graduate Department of Chemical Materials, Institute for Plastic Information and Energy Materials, Sustainable Utilization of Photovoltaic Energy Research Center, Pusan National University, Busan, 46241, Republic of Kor…
  • Department of Chemical Engineering, Center for Innovative Chemical Processes, Institute of Engineering, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul, 02504, Republic of Korea.

ORCID-Profile: Jinhwan Yoon

Förderung

  • Ministry of Science and ICT
  • National Research Foundation of Korea through the Mid-Career Research Program
  • Engineering Research Center Program
  • Ministry of Science and ICT, South Korea

Zitieren

APA

Park, J., Singh, S., & Yoon, J. (2025). 3D Printing of Deformable Multicolor Alternating‐Current Electroluminescent Devices Through Rational Design of Functional Inks. Small, 21(31). https://doi.org/10.1002/smll.202502435

Vancouver

Park J, Singh S, Yoon J. 3D Printing of Deformable Multicolor Alternating‐Current Electroluminescent Devices Through Rational Design of Functional Inks. Small. 2025;21(31). doi:10.1002/smll.202502435

BibTeX
@article{Park2025,
  author = {Park, Jeongbin and Singh, Shakti and Yoon, Jinhwan},
  title = {3D Printing of Deformable Multicolor Alternating‐Current Electroluminescent Devices Through Rational Design of Functional Inks},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {31},
  doi = {10.1002/smll.202502435}
}
Kostenlos starten →