Monolithic Perovskite/Silicon Tandem Solar Cells Enabled by Multifunctional TiO x Interconnects
Small · 2025-06 · 21 (24)
DOI: 10.1002/smll.202500969 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 27.04.2025. Verfasst von Takuya Matsui und 5 weiteren Autor:innen. Beteiligte Einrichtung: Renewable Energy Advanced Research Center, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki, …. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: New Energy and Industrial Technology Development Organization, Royal Academy of Engineering, Engineering and Physical Sciences Research Council.
Abstract (Originalsprache)
Perovskite‐on‐silicon tandem solar cells have emerged as a leading technology enabling high power conversion efficiencies (PCE) over 30%. Despite current progress, the intrinsic multilayer device design presents vast challenges in complexity, which can be a drawback in future mass production. Multifunctional nanolayer materials that simplify large‐scale production are therefore highly desirable. Herein, a TiO x layer (∼3–5 nm) grown by atomic layer deposition (ALD) enables a series interconnection of a perovskite n‐i‐p top cell with a silicon wafer directly. The TiO x layer serves as an all‐in‐one interconnect, fulfilling the functions of silicon surface passivation, hole extraction from silicon, and recombination junction at the top/bottom cell interface. As a result, a proof‐of‐concept 22.4%‐efficient tandem device is demonstrated. Furthermore, an improved PCE of 26.5% is achieved by capping the TiO x with a thin ALD‐TiN y layer (∼4 nm). This represents a performance as high as the reference tandem device (PCE = 25.5%) that uses amorphous silicon passivating selective contacts and an indium‐tin‐oxide interlayer. Such a TiO x multifunctional nanolayer can reduce the number of deposition tools and eliminate the need of an indium‐based interconnection. It offers a potential for low‐cost, scalable, and sustainable tandem solar cell manufacturing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Renewable Energy Advanced Research Center, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki, 305-8568, Japan.
- Department of Materials, University of Oxford, 16 Parks Rd, Oxford, OX1 3PH, UK.
ORCID-Profile: Takuya Matsui, Calum McDonald, Abduheber Mirzehmet, Ruy Sebastian Bonilla, Hitoshi Sai
Förderung
- New Energy and Industrial Technology Development Organization
- Royal Academy of Engineering
- Engineering and Physical Sciences Research Council
Zitieren
APA
Matsui, T., McDonald, C., Mirzehmet, A., McQueen, J., Bonilla, R. S., & Sai, H. (2025). Monolithic Perovskite/Silicon Tandem Solar Cells Enabled by Multifunctional TiO x Interconnects. Small, 21(24). https://doi.org/10.1002/smll.202500969
Vancouver
Matsui T, McDonald C, Mirzehmet A, McQueen J, Bonilla RS, Sai H. Monolithic Perovskite/Silicon Tandem Solar Cells Enabled by Multifunctional TiO x Interconnects. Small. 2025;21(24). doi:10.1002/smll.202500969
BibTeX
@article{Matsui2025,
author = {Matsui, Takuya and McDonald, Calum and Mirzehmet, Abduheber and McQueen, James and Bonilla, Ruy Sebastian and Sai, Hitoshi},
title = {Monolithic Perovskite/Silicon Tandem Solar Cells Enabled by Multifunctional TiO x Interconnects},
journal = {Small},
year = {2025},
volume = {21},
number = {24},
doi = {10.1002/smll.202500969}
}
EUVIMED