EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Pulsed Electrochemical Exfoliation for an HF‐Free Sustainable MXene Synthesis

Markus Ostermann iD, Marko Piljević iD, Elahe Akbari iD, Prathamesh Patil, Veronika Zahorodna iD, Ivan Baginskiy iD, Oleksiy Gogotsi iD, Carsten Gachot iD, Manel Rodríguez Ripoll iD, Markus Valtiner iD, Pierluigi Bilotto iD

Small · 2025-06 · 21 (22)

DOI: 10.1002/smll.202500807 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 30.03.2025. Verfasst von Markus Ostermann und 10 weiteren Autor:innen. Beteiligte Einrichtung: CEST GmbH, Centre for Electrochemical Surface Technology, A-2700, Wiener Neustadt, Austria. Die Arbeit wurde bisher 69-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Gesellschaft für Forschungsförderung Niederösterreich, ERDF (European Research and Development Fund), Österreichische Forschungsförderungsgesellschaft.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

MXenes are a 2D materials (2DM) class with high industrialization potential, owing to their superb properties and compositional variety. However, ensuring high etching efficiency in the synthesis process without involving toxic, hazardous or non‐sustainable chemicals are challenging. In this work, an upscalable electrochemical MXene synthesis is presented. This novel protocol uses a non‐toxic and sustainable sodium tetrafluoroborate/hydrochloric acid (NaBF 4 /HCl) electrolyte and increases etching efficiency by applying cathodic pulsing via pulse voltammetry. Hydrogen bubble formation restores electrochemical activity, and effectively supports 2D‐sheet removal, allowing continuous etching at higher yields in situ. In detail, yields of up to 60% electrochemical MXene (EC‐MXene) with no byproducts from a single exfoliation cycle are achieved. EC‐MXene had an excellent quality with high purity as assessed using chemical mapping by scanning electron microscopy with energy dispersive electron spectroscopy (SEM/EDX) and surface termination analysis performed with X‐ray photoelectron spectroscopy (XPS) and, for the first time, with low energy ion scattering (LEIS). Further properties of EC‐MXenes such as dimensions and adhesion energy of single flakes, vibrational peaks, and interlayer spacing are provided by atomic force microscopy (AFM), X‐ray diffraction (XRD), Raman spectroscopy (Raman), and transmission electron microscopy (TEM) respectively. Pulsed electrochemical synthesis is key to surface reactivation at the electrodes' interface, which results in improved exfoliation and quality of EC‐MXenes. This paves the way for scaling up and green industrialization of MXenes.

Schlagwörter

Stichwörter der Autor:innen

2D‐materialselectrochemical synthesisgreen industrymxenesustainability

Autor:innen und Institutionen

  • CEST GmbH, Centre for Electrochemical Surface Technology, A-2700, Wiener Neustadt, Austria.
  • AC2T research GmbH, A-2700, Wiener Neustadt, Austria.
  • Applied Interface Physics, TU Wien, A-1040, Vienna, Austria.
  • Carbon-Ukraine (Y-Carbon LLC), 04116, Kyiv, Ukraine.
  • Institute of Engineering Design and Product Development, Research Unit Tribology (E307-05), TU Wien, A-1060, Vienna, Austria.

ORCID-Profile: Markus Ostermann, Marko Piljević, Elahe Akbari, Veronika Zahorodna, Ivan Baginskiy, Oleksiy Gogotsi, Carsten Gachot, Manel Rodríguez Ripoll, Markus Valtiner, Pierluigi Bilotto

Förderung

  • Gesellschaft für Forschungsförderung Niederösterreich
  • ERDF (European Research and Development Fund)
  • Österreichische Forschungsförderungsgesellschaft
  • Technische Universität Wien Bibliothek
  • HORIZON EUROPE Framework Programme

Zitieren

APA

Ostermann, M., Piljević, M., Akbari, E., Patil, P., Zahorodna, V., Baginskiy, I., Gogotsi, O., Gachot, C., Rodríguez Ripoll, M., Valtiner, M., & Bilotto, P. (2025). Pulsed Electrochemical Exfoliation for an HF‐Free Sustainable MXene Synthesis. Small, 21(22). https://doi.org/10.1002/smll.202500807

Vancouver

Ostermann M, Piljević M, Akbari E, Patil P, Zahorodna V, Baginskiy I, et al. Pulsed Electrochemical Exfoliation for an HF‐Free Sustainable MXene Synthesis. Small. 2025;21(22). doi:10.1002/smll.202500807

BibTeX
@article{Ostermann2025,
  author = {Ostermann, Markus and Piljević, Marko and Akbari, Elahe and Patil, Prathamesh and Zahorodna, Veronika and Baginskiy, Ivan and Gogotsi, Oleksiy and Gachot, Carsten and Rodríguez Ripoll, Manel and Valtiner, Markus and Bilotto, Pierluigi},
  title = {Pulsed Electrochemical Exfoliation for an HF‐Free Sustainable MXene Synthesis},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {22},
  doi = {10.1002/smll.202500807}
}
Kostenlos starten →