Versatile Decal‐Transfer Method for Fabricating and Analyzing Microporous Layers in Polymer Electrolyte Membrane Water Electrolysis
Small · 2025-06 · 21 (22)
DOI: 10.1002/smll.202500086 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 02.05.2025. Verfasst von Gi Hong Jung und 14 weiteren Autor:innen. Beteiligte Einrichtung: Hydrogen Research Department, Korea Institute of Energy Research, 152 Gajeong-ro, Yuseong-gu, Daejeon, 34129, Republic of Korea. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Ministry of Science and ICT, South Korea, National Research Foundation of Korea.
Abstract (Originalsprache)
Polymer electrolyte membrane water electrolysis (PEMWE) is hindered by the reliance on expensive iridium‐based catalysts. To address this economic challenge, minimizing iridium usage while maintaining performance and durability is imperative. Achieving this goal requires enhanced catalyst utilization through improved electron, ion, and mass transport within the anode. Recent research has increasingly emphasized the development of microporous layers (MPLs) as a key strategy for enhancing the interface between the porous transport layer (PTL) and the catalyst layer (CL). However, standardized methodologies for MPL design and fabrication remain elusive. In this study, a decal‐transfer method is presented as an effective method for introducing a uniform, thin MPL at the CL/PTL interface. By varying the MPL properties, including pore size, thickness, and back‐layer structure, two‐phase transport phenomena are investigated and established guidelines for optimal MPL design. The findings reveal that smaller micrometer‐scale pores in the MPL enhance catalyst utilization and strengthen water capillary force, thereby reducing kinetic and transport overpotentials. Moreover, it is demonstrated that, unless the back layer hinders the in‐plane mass transport beneath the flow field, its structural configuration has minimal influence on electrolysis performance. These results underscore the importance of the CL/PTL interface in determining the overall efficiency of PEMWE systems.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hydrogen Research Department, Korea Institute of Energy Research, 152 Gajeong-ro, Yuseong-gu, Daejeon, 34129, Republic of Korea.
- Department of Chemical and Biomolecular Engineering, Yonsei University, Seoul, 03722, Republic of Korea.
- University of South Carolina, Department of Chemical Engineering, Columbia, SC, 29208, USA.
- Department of Chemistry, Kookmin University, Seoul, 02707, Republic of Korea.
- Department of Applied Chemistry, Kookmin University, Seoul, 02707, Republic of Korea.
- Department of Chemical and Biomolecular Engineering, Sogang University, 35 Baekbeom-ro, Mapo-gu, Seoul, 04107, Republic of Korea.
ORCID-Profile: Changsoo Lee, Gisu Doo, Hyun-Seok Cho
Förderung
- Ministry of Science and ICT, South Korea
- National Research Foundation of Korea
Zitieren
APA
Jung, G. H., Yun, Y. H., An, S., Kim, D., Sepe, M., Choi, S., Seo, J., Kim, M., Lee, S., Park, H., Shimpalee, S., Kim, H., Lee, C., Doo, G., & Cho, H. S. (2025). Versatile Decal‐Transfer Method for Fabricating and Analyzing Microporous Layers in Polymer Electrolyte Membrane Water Electrolysis. Small, 21(22). https://doi.org/10.1002/smll.202500086
Vancouver
Jung GH, Yun YH, An S, Kim D, Sepe M, Choi S, et al. Versatile Decal‐Transfer Method for Fabricating and Analyzing Microporous Layers in Polymer Electrolyte Membrane Water Electrolysis. Small. 2025;21(22). doi:10.1002/smll.202500086
BibTeX
@article{Jung2025,
author = {Jung, Gi Hong and Yun, Youg Hwa and An, Sieon and Kim, Daehee and Sepe, Mitchell and Choi, Seungwook and Seo, Jongsu and Kim, MinJoong and Lee, Sechan and Park, Hyeonjung and Shimpalee, Sirivatch and Kim, Hansung and Lee, Changsoo and Doo, Gisu and Cho, Hyun-Seok},
title = {Versatile Decal‐Transfer Method for Fabricating and Analyzing Microporous Layers in Polymer Electrolyte Membrane Water Electrolysis},
journal = {Small},
year = {2025},
volume = {21},
number = {22},
doi = {10.1002/smll.202500086}
}
EUVIMED