Magnetic Turtle‐Like Robot with Biomimetic Movements Through Programmable Magnetic‐Assisted 3D Printing
Small · 2025-08 · 21 (31)
DOI: 10.1002/smll.202412599 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 02.06.2025. Verfasst von Hanman Zheng und 9 weiteren Autor:innen. Beteiligte Einrichtung: The Center for X-Mechanics, School of Aeronautics and Astronautics, Zhejiang University, Hangzhou, 310027, China. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Robotics, Biomimetics, Turtles. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: "Pioneer" R&D Program of Zhejiang, Laoshan laboratory, National Natural Science Foundation of China.
Abstract (Originalsprache)
Animals can respond quickly to environmental stimuli and generate complex deformations. The locomotion modes of turtles vary with changing environments, which inspires the design of bionic robots. Existing turtle‐like robots exhibit high movement efficiency and multi‐terrain adaptability. However, challenges remain in improving the untethered designs, miniaturization, and response speed of these robots. Herein, a millimeter‐scale turtle‐like robot through programmable magnetic‐assisted 3D printing is proposed. Hinge structures and magnetization distribution design are introduced to mimic the turtle joints. The magnetization distribution can be regulated through 3D printing. Considering that tortoises and sea turtles have different gaits, three magnetization distributions to achieve diagonal and synchronous gaits are designed. In the multi‐terrain model, the robot exhibits maneuverability to crawl across sand, grass, gravel, and mountains. Specifically, the robot can climb over a stone wall that is 5.6 times its height and avoid obstacles. The robot is also capable of delivering cargo that weighs 1.2 times its weight along target trajectories. Furthermore, the different magnetization distribution designs enable robots to move separately within the same magnetic field. This independent actuation can be used for multi‐robot collaboration.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- The Center for X-Mechanics, School of Aeronautics and Astronautics, Zhejiang University, Hangzhou, 310027, China.
- Ocean College, Zhejiang University, Zhoushan, 316021, China.
- The State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China.
- The State Key Laboratory of Robotics and Systems, School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, 150080, China.
ORCID-Profile: Tiefeng Li
Förderung
- "Pioneer" R&D Program of Zhejiang
- Laoshan laboratory
- National Natural Science Foundation of China
- Pre-research Task
Zitieren
APA
Zheng, H., Rao, D., Sun, H., Li, S., Zhang, C., Zhou, F., Mao, L., Zhang, H., Xie, H., & Li, T. (2025). Magnetic Turtle‐Like Robot with Biomimetic Movements Through Programmable Magnetic‐Assisted 3D Printing. Small, 21(31). https://doi.org/10.1002/smll.202412599
Vancouver
Zheng H, Rao D, Sun H, Li S, Zhang C, Zhou F, et al. Magnetic Turtle‐Like Robot with Biomimetic Movements Through Programmable Magnetic‐Assisted 3D Printing. Small. 2025;21(31). doi:10.1002/smll.202412599
BibTeX
@article{Zheng2025,
author = {Zheng, Hanman and Rao, Dingnan and Sun, Haonan and Li, Shishi and Zhang, Chengqian and Zhou, Fanghao and Mao, Liyang and Zhang, Hao and Xie, Hui and Li, Tiefeng},
title = {Magnetic Turtle‐Like Robot with Biomimetic Movements Through Programmable Magnetic‐Assisted 3D Printing},
journal = {Small},
year = {2025},
volume = {21},
number = {31},
doi = {10.1002/smll.202412599}
}
EUVIMED