EUVIMEDEUVIMED entdecken
Crossref

High‐Performance Flexible Electronics Fabricated Using a Surface Energy‐Directed Assembly Process on Ultrathin Polyimide Substrates

Zetong Li iD, Zhimin Chai iD, Guangji Wang, Jingwei Zhang, Tongqing Wang, Dewen Zhao, Ahmed A Busnaina, Xinchun Lu

Small · 2025-07 · 21 (29)

DOI: 10.1002/smll.202409458 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 03.02.2025. Verfasst von Zetong Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Tsinghua University, Beijing, 100084, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 70 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Tsinghua University Initiative Scientific Research Program in China, Tsinghua University in China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solution‐based processes are emerging in the fabrication of flexible electronics owing to their cost‐effectiveness, low‐temperature processing capabilities, and vacuum‐free operations. Currently, printing techniques, as the most widely used solution‐based processes, suffer from low resolution and poor pattern fidelity. Although surface energy‐directed assembly (SEDA) process enables unparalleled resolution and fidelity, multilayer fabrication and application on flexible substrates are rarely attempted. Here, a SEDA process is used for fabricating metal oxide thin film transistors (TFTs) on ultrathin and flexible polyimide (PI) substrates with a thickness of ≈35 µm. Comprehensive procedures to render PI substrates hydrophobic as well as to homogenize the hydrophobicity of the PI substrates and as‐assembled layers are developed. All‐solution‐processed flexible TFTs are constructed by assembling indium oxide semiconducting channels, indium tin oxide source/drain electrodes, aluminum oxide gate dielectric layers, and indium tin oxide gate electrodes ordinally. The metal oxide TFTs exhibit excellent electrical properties with an average mobility of 22.01 cm 2 V −1 s −1 and stable operation under mechanical strain. Flexible inverters with a high voltage gain of 78 and a high dynamic operation frequency of up to 1 kHz are also constructed, representing new opportunities of the SEDA process for the fabrication of next‐generation flexible electronics.

Schlagwörter

Stichwörter der Autor:innen

directed assemblyflexible electronicssurface energyultrathin polyimide substrateswetting/dewetting

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Tsinghua University, Beijing, 100084, China.
  • State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, Beijing, 100084, China.
  • NSF Nanoscale Science and Engineering Center for High-Rate Nanomanufacturing (CHN), Northeastern University, Boston, MA, 02115, USA.

ORCID-Profile: Zetong Li, Zhimin Chai

Förderung

  • National Natural Science Foundation of China
  • Tsinghua University Initiative Scientific Research Program in China
  • Tsinghua University in China

Zitieren

APA

Li, Z., Chai, Z., Wang, G., Zhang, J., Wang, T., Zhao, D., Busnaina, A. A., & Lu, X. (2025). High‐Performance Flexible Electronics Fabricated Using a Surface Energy‐Directed Assembly Process on Ultrathin Polyimide Substrates. Small, 21(29). https://doi.org/10.1002/smll.202409458

Vancouver

Li Z, Chai Z, Wang G, Zhang J, Wang T, Zhao D, et al. High‐Performance Flexible Electronics Fabricated Using a Surface Energy‐Directed Assembly Process on Ultrathin Polyimide Substrates. Small. 2025;21(29). doi:10.1002/smll.202409458

BibTeX
@article{Li2025,
  author = {Li, Zetong and Chai, Zhimin and Wang, Guangji and Zhang, Jingwei and Wang, Tongqing and Zhao, Dewen and Busnaina, Ahmed A and Lu, Xinchun},
  title = {High‐Performance Flexible Electronics Fabricated Using a Surface Energy‐Directed Assembly Process on Ultrathin Polyimide Substrates},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {29},
  doi = {10.1002/smll.202409458}
}
Kostenlos starten →