A Photo‐Assisted Zinc–Air Battery with MoS 2 /Oxygen Vacancies Rich TiO 2 Heterojunction Photocathode
Small · 2024-12 · 20 (52)
DOI: 10.1002/smll.202408627 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 21.10.2024. Verfasst von Yongjian Wu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Key Laboratory of Structure and Functional Regulation of Hybrid Materials, Ministry of Education, Anhui …. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 80 Literaturangaben. Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Excellent Research Innovation Team of Anhui Provincial Education Department.
Abstract (Originalsprache)
Converting solar energy into electrochemical energy is a sustainable strategy, but the design of photo‐assisted zinc–air battery (ZAB) with efficient utilization of sunlight faces huge challenges. Herein, a photo‐assisted ZAB of a three‐electrode system using MoS 2 /oxygen vacancies‐rich TiO 2 heterojunction as charge cathode and Fe, N‐doped carbon matrix (FeNC) as discharge cathode is constructed, where MoS 2 is chosen as solar light‐responsive catalytic material and TiO 2 acts as electron transport layer and hole blocking layer, arising from a train of thought for efficient charging under sunlight irradiation and light‐independent discharging. The introduction of oxygen vacancies in TiO 2 facilitates the temporary trapping of carriers and triggers rapid carrier transfer at the interface of the heterojunction, which hinders the recombination of photogenerated holes, thereby facilitating their further participation in the oxygen evolution reaction. Moreover, FeNC exhibits superior oxygen reduction reaction performance due to strong d‐π interactions. As a result, the well‐built ZABs deliver a low charge voltage (0.71 V) under illumination at 0.1 mA cm −2 , and a high power density (167.6 mW cm −2 ) in dark. This work paves a special way for the development of ZABs by directly harvesting solar energy in charging and efficiently discharging regardless of lighting conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Key Laboratory of Structure and Functional Regulation of Hybrid Materials, Ministry of Education, Anhui University, Hefei, Anhui, 230601, P. R. China.
- School of Materials and Chemical Engineering, Anhui Jianzhu University, Hefei, Anhui, 230601, P. R. China.
- School of Physics and Electronics, Shandong Normal University, Jinan, 250014, P. R. China.
ORCID-Profile: Mingzai Wu
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
- Excellent Research Innovation Team of Anhui Provincial Education Department
- Key Natural Science Research Project of Anhui Provincial Education Deparment
- Key Research and Development Program of Anhui Province
- Opening Foundation of Shanxi Provincial Key Laboratory for High Performance Battery Materials and Devices
- National Key Research and Development Program of China
Zitieren
APA
Wu, Y., Ding, Y., Chen, M., Zhang, H., Yu, J., Jiang, T., & Wu, M. (2024). A Photo‐Assisted Zinc–Air Battery with MoS 2 /Oxygen Vacancies Rich TiO 2 Heterojunction Photocathode. Small, 20(52). https://doi.org/10.1002/smll.202408627
Vancouver
Wu Y, Ding Y, Chen M, Zhang H, Yu J, Jiang T, et al. A Photo‐Assisted Zinc–Air Battery with MoS 2 /Oxygen Vacancies Rich TiO 2 Heterojunction Photocathode. Small. 2024;20(52). doi:10.1002/smll.202408627
BibTeX
@article{Wu2024,
author = {Wu, Yongjian and Ding, Yi and Chen, Mengyu and Zhang, Hui and Yu, Jing and Jiang, Tongtong and Wu, Mingzai},
title = {A Photo‐Assisted Zinc–Air Battery with MoS 2 /Oxygen Vacancies Rich TiO 2 Heterojunction Photocathode},
journal = {Small},
year = {2024},
volume = {20},
number = {52},
doi = {10.1002/smll.202408627}
}
EUVIMED