EUVIMEDEUVIMED entdecken
Crossref

Conductive Porous Solid Framework Mechanically Stabilized Si Anode

Run Gu, Shiji Shen, Xinran Li, Wenyi Xiang, Xiangkun Kong, Jixiang Hu, Xiaoye Liu, Zongzi Jin, Cui Li, Xu Ma, Yinhua Bao, Chengwei Wang iD

Small · 2025-01 · 21 (3)

DOI: 10.1002/smll.202408457 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 26.11.2024. Verfasst von Run Gu und 11 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Precision and Intelligent Chemistry, University of Science and Technology of China, Hefei, Anhui, 230026, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micron‐sized Si anodes garner renewed attention due to their advantages of low cost, small specific surface area, and high energy density. However, micron‐sized Si anodes undergo significant volume changes during lithiation/delithiation, leading to particle cracking and pulverization. This study employs the tape casting method and ultrafast high‐temperature sintering technology to construct a porous sheet, within which a solid framework constrains the Si particles. In rate performance tests, when the current density rises to 1 A g −1 , the micron‐sized Si in the porous sheet demonstrates a delithiation capacity of 2145 mAh g −1 , compared to 113 mAh g −1 for the pristine Si, showing efficient ion and electron conductive pathways in the framework. When cycled at 0.3 A g −1 , the delithiation capacity of the ball‐milled micron‐sized Si in the porous sheet is 1496 mAh g −1 after 100 cycles, in contrast to 95 mAh g −1 for the pristine Si. The enhanced cycling stability of Si in the porous sheet results from the strong mechanical constraint imposed by the solid framework, which suppresses volume changes, inhibits particle cracking, and reduces solid electrolyte interphase growth. This strategy of constructing porous sheets and utilizing solid‐solid bonding to constrain Si particles represents a novel approach for Si anode modification.

Schlagwörter

Stichwörter der Autor:innen

conductive porous frameworkcycling stabilitymicron‐sized sisolid‐solid constraint

Autor:innen und Institutionen

  • Key Laboratory of Precision and Intelligent Chemistry, University of Science and Technology of China, Hefei, Anhui, 230026, China.
  • Department of Materials Science and Engineering, University of Science and Technology of China, Hefei, Anhui, 230026, China.
  • Shanghai Institute of Applied Mathematics and Mechanics, School of Mechanics and Engineering Science, Shanghai Key Laboratory of Mechanics in Energy Engineering, Shanghai University, Shanghai, 200444, China.

ORCID-Profile: Chengwei Wang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Gu, R., Shen, S., Li, X., Xiang, W., Kong, X., Hu, J., Liu, X., Jin, Z., Li, C., Ma, X., Bao, Y., & Wang, C. (2025). Conductive Porous Solid Framework Mechanically Stabilized Si Anode. Small, 21(3). https://doi.org/10.1002/smll.202408457

Vancouver

Gu R, Shen S, Li X, Xiang W, Kong X, Hu J, et al. Conductive Porous Solid Framework Mechanically Stabilized Si Anode. Small. 2025;21(3). doi:10.1002/smll.202408457

BibTeX
@article{Gu2025,
  author = {Gu, Run and Shen, Shiji and Li, Xinran and Xiang, Wenyi and Kong, Xiangkun and Hu, Jixiang and Liu, Xiaoye and Jin, Zongzi and Li, Cui and Ma, Xu and Bao, Yinhua and Wang, Chengwei},
  title = {Conductive Porous Solid Framework Mechanically Stabilized Si Anode},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {3},
  doi = {10.1002/smll.202408457}
}
Kostenlos starten →