EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Twice‐Functionalized Montmorillonite Nanosheets for Polymer‐Derived MMT‐SiOC Nanocomposites: Phase Formation and Porosity

Advaith V Rau, Kathy Lu iD

Small · 2025-05 · 21 (19)

DOI: 10.1002/smll.202408218 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 07.04.2025. Verfasst von Advaith V Rau und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, 24061, USA. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, the, Air Force Office of Scientific Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, montmorillonite (MMT) nanosheets are purified and exfoliated from a crude clay source and further twice‐functionalized with cetritrimethylammonium bromide and [3‐(2‐aminoethylamino)propyl]trimethoxysliane (AEAPTMS) to promote dispersion in the preceramic polymer. Phase profiles and compositions of MMT nanoflakes and MMT‐silicon oxycarbide (SiOC) are characterized with X‐ray diffraction, infrared spectroscopy, and thermogravimetric analysis. The microstructures are examined by scanning and transmission electron microscopy. MMT nanoflakes are randomly dispersed in the SiOC matrix with α‐quartz forming at the MMT‐SiOC interface. Pyrolysis to 1400 °C induced the formation of SiC nanowhiskers that are observed up to 20 µm in length and 200 nm in diameter. After selective etching of SiO 2 domains with HF, pore sizes and specific surface areas of MMT‐SiOC are analyzed with nitrogen adsorption. The study provided a new fundamental understanding of MMT‐SiOC interactions at different pyrolysis temperatures and also led to composites with specific surface areas reaching 120 m 2 g −1 up to 1200 °C pyrolysis, and between 340 and 772 m 2 g −1 at 1400 °C pyrolysis and pore size distributions between 2 and 5 nm. The methodology and results presented improve the understanding and viability of 2D nanomaterial‐reinforced ceramic composites and MMT as a precursor for nanostructured SiC.

Schlagwörter

Stichwörter der Autor:innen

ceramic nanocompositesmontmorilloniteporositysilicon carbidesilicon oxycarbide

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, 24061, USA.
  • Department of Mechanical and Materials Engineering, University of Alabama-Birmingham, Birmingham, AL, 35294, USA.

ORCID-Profile: Kathy Lu

Förderung

  • National Science Foundation
  • the
  • Air Force Office of Scientific Research

Zitieren

APA

Rau, A. V., & Lu, K. (2025). Twice‐Functionalized Montmorillonite Nanosheets for Polymer‐Derived MMT‐SiOC Nanocomposites: Phase Formation and Porosity. Small, 21(19). https://doi.org/10.1002/smll.202408218

Vancouver

Rau AV, Lu K. Twice‐Functionalized Montmorillonite Nanosheets for Polymer‐Derived MMT‐SiOC Nanocomposites: Phase Formation and Porosity. Small. 2025;21(19). doi:10.1002/smll.202408218

BibTeX
@article{Rau2025,
  author = {Rau, Advaith V and Lu, Kathy},
  title = {Twice‐Functionalized Montmorillonite Nanosheets for Polymer‐Derived MMT‐SiOC Nanocomposites: Phase Formation and Porosity},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {19},
  doi = {10.1002/smll.202408218}
}
Kostenlos starten →