Microwave‐Assisted Fabrication of Copper Oxide/N‐Doped Carbon Nanocatalyst for Efficient Electrochemical CO 2 Conversion to Liquid Fuels
Small · 2025-02 · 21 (7)
DOI: 10.1002/smll.202406765 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 05.11.2024. Verfasst von Anwesha Banerjee und 8 weiteren Autor:innen. Beteiligte Einrichtung: Chemistry Department, Indian Institute of Technology Bombay, Powai, Maharashtra, 400076, India. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: DST, India-supported National Center of Excellence in Carbon Capture and Utilization, Center of Excellence in Oil, Gas, and Energy.
Abstract (Originalsprache)
Electrochemical CO 2 reduction reaction (CO 2 RR), which is driven by electricity generated from renewable energy sources, is a promising technology for sustainably producing carbon‐based chemicals or fuels. Several CO 2 RR catalysts have been explored to date, among which copper‐based electrocatalysts are the most widely known for electrochemical CO 2 RR and are extensively studied for their ability to generate an array of products. Their low selectivity, however, hinders their possibility of being used for practical purposes. In this work, a microwave‐assisted one‐pot synthesized Cu x O/N‐doped carbon demonstrates the electrochemical conversion of carbon dioxide into multiple C 1 products (mainly formate and methanol), with a maximum Faradaic efficiency of 95% in 0.10 m KHCO 3 aqueous solution at a moderately low applied potential of −0.55 V versus RHE (reversible hydrogen electrode). The in‐depth theoretical study reveals the key contribution of pyridinic N‐based N‐doped carbon sites and Cu 2 O clusters in CO 2 adsorption and its subsequent conversion to formate and methanol via an energetically favorable formate pathway. The electrocatalyst continued to demonstrate CO 2 reduction to valuable C 1 products when a simulated flue gas stream containing 15% CO 2 along with 500 ppm SO x and 200 ppm NO x is used as an inlet feed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chemistry Department, Indian Institute of Technology Bombay, Powai, Maharashtra, 400076, India.
- Department of Chemistry, Central University of Punjab, Bathinda, Punjab, 151401, India.
- Department of Physics and Astrophysics, University of Delhi, New Delhi, 110007, India.
- Earth Sciences Department, Indian Institute of Technology Bombay, Powai, Maharashtra, 400076, India.
- National Center of Excellence for Carbon Capture and Utilization (NCoE-CCU), Indian Institute of Technology Bombay, Powai, Maharashtra, 400076, India.
- Interdisciplinary Program in Climate Studies, Indian Institute of Technology Bombay, Powai, Maharashtra, 400076, India.
ORCID-Profile: Arnab Dutta
Förderung
- DST
- India-supported National Center of Excellence in Carbon Capture and Utilization
- Center of Excellence in Oil, Gas, and Energy
- Department of Science and Technology, Government of Rajasthan
Zitieren
APA
Banerjee, A., Jain, S., Dastider, S. G., Biswas, R., Das, S., Mondal, K., Vishal, V., Lahiri, G. K., & Dutta, A. (2025). Microwave‐Assisted Fabrication of Copper Oxide/N‐Doped Carbon Nanocatalyst for Efficient Electrochemical CO 2 Conversion to Liquid Fuels. Small, 21(7). https://doi.org/10.1002/smll.202406765
Vancouver
Banerjee A, Jain S, Dastider SG, Biswas R, Das S, Mondal K, et al. Microwave‐Assisted Fabrication of Copper Oxide/N‐Doped Carbon Nanocatalyst for Efficient Electrochemical CO 2 Conversion to Liquid Fuels. Small. 2025;21(7). doi:10.1002/smll.202406765
BibTeX
@article{Banerjee2025,
author = {Banerjee, Anwesha and Jain, Siddarth and Dastider, Saptarshi Ghosh and Biswas, Rathindranath and Das, Srewashi and Mondal, Krishnakanta and Vishal, Vikram and Lahiri, Goutam Kumar and Dutta, Arnab},
title = {Microwave‐Assisted Fabrication of Copper Oxide/N‐Doped Carbon Nanocatalyst for Efficient Electrochemical CO 2 Conversion to Liquid Fuels},
journal = {Small},
year = {2025},
volume = {21},
number = {7},
doi = {10.1002/smll.202406765}
}
EUVIMED