EUVIMEDEUVIMED entdecken
Crossref

Self‐Templated 3D Sulfide‐Based Solid Composite Electrolyte for Solid‐State Sodium Metal Batteries

Xiaolin Guo, Yang Li, Selim Halacoglu, Kincaid Graff, Chunyan Zhang, Kelvin Fu, Hui Claire Xiong, Hui Wang iD

Small · 2024-12 · 20 (52)

DOI: 10.1002/smll.202406298 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 31.10.2024. Verfasst von Xiaolin Guo und 7 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, University of Louisville, Louisville, KY, 40292, USA. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 64 Literaturangaben. Gefördert von: National Science Foundation, U.S. Department of Energy, Office of Science.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rechargeable solid‐state sodium metal batteries (SSMBs) experience growing attention owing to the increased energy density (vs Na‐ion batteries) and cost‐effective materials. Inorganic sulfide‐based Na‐ion conductors also possess significant potential as promising solid electrolytes (SEs) in SSMBs. Nevertheless, due to the highly reactive Na metal, poor interface compatibility is the biggest obstacle for inorganic sulfide solid electrolytes such as Na 3 SbS 4 to achieve high performance in SSMBs. To address such electrochemical instability at the interface, new design of sulfide SE nanostructures and interface engineering are highly essential. In this work, a facile and straightforward approach is reported to prepare 3D sulfide‐based solid composite electrolytes (SCEs), which utilize porous Na 3 SbS 4 (NSS) as a self‐templated framework and fill with a phase transition polymer. The 3D structured SCEs display obviously improved interface stability toward Na metal than pristine sulfide. The assembled SSMBs (with TiS 2 or FeS 2 as cathodes) deliver outstanding electrochemical cycling performance. Moreover, the cycling of high‐voltage oxide cathode Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) is also demonstrated in SSMBs using 3D sulfide‐based SCEs. This study presents a novel design on the self‐templated nanostructure of SCEs, paving the way for the advancement of high‐energy sodium metal batteries.

Schlagwörter

Stichwörter der Autor:innen

Na‐ion conductorself‐templatesodium metal batteriessolid composite electrolytesulfide

Autor:innen und Institutionen

  • Mechanical Engineering Department, University of Louisville, Louisville, KY, 40292, USA.
  • Micron School of Materials Science and Engineering, Boise State University, Boise, ID, 83725, USA.
  • Mechanical Engineering Department, University of Delaware, Newark, DE, 19716, USA.

ORCID-Profile: Hui Wang

Förderung

  • National Science Foundation
  • U.S. Department of Energy
  • Office of Science

Zitieren

APA

Guo, X., Li, Y., Halacoglu, S., Graff, K., Zhang, C., Fu, K., Xiong, H. C., & Wang, H. (2024). Self‐Templated 3D Sulfide‐Based Solid Composite Electrolyte for Solid‐State Sodium Metal Batteries. Small, 20(52). https://doi.org/10.1002/smll.202406298

Vancouver

Guo X, Li Y, Halacoglu S, Graff K, Zhang C, Fu K, et al. Self‐Templated 3D Sulfide‐Based Solid Composite Electrolyte for Solid‐State Sodium Metal Batteries. Small. 2024;20(52). doi:10.1002/smll.202406298

BibTeX
@article{Guo2024,
  author = {Guo, Xiaolin and Li, Yang and Halacoglu, Selim and Graff, Kincaid and Zhang, Chunyan and Fu, Kelvin and Xiong, Hui Claire and Wang, Hui},
  title = {Self‐Templated 3D Sulfide‐Based Solid Composite Electrolyte for Solid‐State Sodium Metal Batteries},
  journal = {Small},
  year = {2024},
  volume = {20},
  number = {52},
  doi = {10.1002/smll.202406298}
}
Kostenlos starten →