A Two‐Step Dry Etching Model for Non‐Uniform Etching Profile in Gate‐All‐Around Field‐Effect Transistor Manufacturing
Small · 2024-12 · 20 (51)
DOI: 10.1002/smll.202405574 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 11.10.2024. Verfasst von Ziyi Hu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Fabrication Technologies for Integrated Circuits, Institute of Microelectronics, Chinese Academy of Sciences, Beijing, 100029, Chin…. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Chinese Academy of Sciences.
Abstract (Originalsprache)
The Gate‐All‐Around Field‐Effect Transistor (GAAFET) is proposed as a successor to Fin Field‐Effect Transistor (FinFET) technology to increase channel length and improve the device performance. The GAAFET features a complex multilayer structure, which complicates the manufacturing process. One of the most critical steps in GAAFET fabrication is the selective lateral etching of the SiGe layers, essential for forming the inner‐spacer. Industry commonly encounters a non‐uniform etching profile during this step. In this paper, a continuous two‐step dry etching model is proposed to investigate the mechanism behind the formation of the non‐uniform profiles. The model consists of four modules: anisotropic etching simulation, Ge atom diffusion simulation, Si/SiGe etch selectivity calculation and SiGe selective etching simulation. By calibrating and verifying this model with experimental data, the edge rounding and gradient etching rates along the sidewall surface are successfully simulated. Based on further examination of the influence of chamber pressure on the profile using this model, the inner‐spacer shape is improved experimentally by appropriately reducing the chamber pressure. This work aims to provide valuable insights for etching process recipes in advanced GAAFETs manufacturing.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Fabrication Technologies for Integrated Circuits, Institute of Microelectronics, Chinese Academy of Sciences, Beijing, 100029, China.
- School of Integrated Circuits, University of Chinese Academy of Sciences, Beijing, 100049, China.
- School of Microelectronics, Southern University of Science and Technology, Shenzhen, 518055, China.
- Department of Electrical and Electronic Engineering, The University of Hong Kong, Pokfulam Road, Hong Kong, China.
- CDL for Multi-Scale Process Modeling of Semiconductor Devices and Sensors, Institute for Microelectronics, TU Wien, Viena, 1040, Austria.
ORCID-Profile: Zhongrui Wang
Förderung
- Chinese Academy of Sciences
Zitieren
APA
Hu, Z., Li, J., Chen, R., Shang, D., Wei, Y., Wang, Z., Li, L., & Filipovic, L. (2024). A Two‐Step Dry Etching Model for Non‐Uniform Etching Profile in Gate‐All‐Around Field‐Effect Transistor Manufacturing. Small, 20(51). https://doi.org/10.1002/smll.202405574
Vancouver
Hu Z, Li J, Chen R, Shang D, Wei Y, Wang Z, et al. A Two‐Step Dry Etching Model for Non‐Uniform Etching Profile in Gate‐All‐Around Field‐Effect Transistor Manufacturing. Small. 2024;20(51). doi:10.1002/smll.202405574
BibTeX
@article{Hu2024,
author = {Hu, Ziyi and Li, Junjie and Chen, Rui and Shang, Dashan and Wei, Yayi and Wang, Zhongrui and Li, Ling and Filipovic, Lado},
title = {A Two‐Step Dry Etching Model for Non‐Uniform Etching Profile in Gate‐All‐Around Field‐Effect Transistor Manufacturing},
journal = {Small},
year = {2024},
volume = {20},
number = {51},
doi = {10.1002/smll.202405574}
}
EUVIMED