Plasma Induced Atomic‐Scale Soldering Enhanced Efficiency and Stability of Electrocatalysts for Ampere‐Level Current Density Water Splitting
Small · 2024-12 · 20 (50)
DOI: 10.1002/smll.202405567 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 29.09.2024. Verfasst von Minghui Cui und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Photovoltaic Science and Technology, Institute for Electric Light Sources, School of Information Science and Technology, Fuda…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Industrial water electrolysis typically operates at high current densities, the efficiency and stability of catalysts are greatly influenced by mass transport processes and adhesion with substrates. The core scientific issues revolve around reducing transport overpotential losses and enhancing catalyst‐substrate binding to ensure long‐term performance. Herein, vertical Ni‐Co‐P is synthesized and employed plasma treatment for dual modification of its surface and interface with the substrate. The (N)Ni‐Co‐P/Ni 3 N cathode exhibits an ultra‐low overpotential of 421 mV at 4000 mA cm −2 , and the non‐noble metal system only requires a voltage of 1.85 V to reach 1000 mA cm −2 . When integrated into an anion exchange membrane (AEM) electrolyzer, it can operate stably for >300 h at 500 mA cm −2 . Under natural light, the solar‐driven AEM electrolyzer operates at a current density up to 1585 mA cm −2 with a solar‐to‐hydrogen efficiency (SHT) of 9.08%. Density functional theory (DFT) calculations reveal that plasma modification leads to an “atomic‐scale soldering” effect, where the Ni 3 N strong coupling with the Co increases free charge density, simultaneously enhancing stability and conductivity. This research offers a promising avenue for optimizing ampere‐level current density water splitting, paving the way for efficient and sustainable industrial hydrogen production.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Photovoltaic Science and Technology, Institute for Electric Light Sources, School of Information Science and Technology, Fudan University, Shanghai, 200433, China.
- Texas Materials Institute and Department of Mechanical Engineering, The University of Texas at Austin, Austin, TX, 78712, USA.
ORCID-Profile: Minghui Cui
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Cui, M., Guo, R., Wang, F., Zhou, Y., Zhao, W., Liu, Y., Ou, Q., & Zhang, S. (2024). Plasma Induced Atomic‐Scale Soldering Enhanced Efficiency and Stability of Electrocatalysts for Ampere‐Level Current Density Water Splitting. Small, 20(50). https://doi.org/10.1002/smll.202405567
Vancouver
Cui M, Guo R, Wang F, Zhou Y, Zhao W, Liu Y, et al. Plasma Induced Atomic‐Scale Soldering Enhanced Efficiency and Stability of Electrocatalysts for Ampere‐Level Current Density Water Splitting. Small. 2024;20(50). doi:10.1002/smll.202405567
BibTeX
@article{Cui2024,
author = {Cui, Minghui and Guo, Rongjing and Wang, Feilong and Zhou, Yansong and Zhao, Wenqi and Liu, Yanjing and Ou, Qiongrong and Zhang, Shuyu},
title = {Plasma Induced Atomic‐Scale Soldering Enhanced Efficiency and Stability of Electrocatalysts for Ampere‐Level Current Density Water Splitting},
journal = {Small},
year = {2024},
volume = {20},
number = {50},
doi = {10.1002/smll.202405567}
}
EUVIMED